Electrical / Ignition / Fuel Injection

To Bottom

Electrical / Ignition / Fuel Injection (p.12)
Post New Thread
Regular
Supremacy

PSCT Pin from Engine ECU

Hi Guys, I'm in the process of fitting an aftermarket ECU to my MR2. I have pretty much completed the wiring and confirming I have all inputs/outputs correctly wired. Is anyone familiar with how the factory engine ecu and power steering ecu communicate? From what I understand, the engine ecu tells t..
2
2016/01/12 09:39:39
mr2y

SW20 JDM Instrument Cluster wiring

Putting this here for reference. I'm not sure what cluster I have, it's a 'bitsa' with a 260km/h cable speedo (would have been 180k originally), and a voltmeter, but I have tried to figure out the pin outs as best I could. Anyone with a similar cluster is welcome to add information. The part number ..
3
2016/01/09 22:21:49
stuka

Lightweight Battery

My battery is on the way out so in the market for a new one. Given the industry has changed so much recently, has anyone had any experience with light weight batteries or the new lithium generation? Any recommendations? I have seen some of the batteries done by Braille and also the lithiumax 400 CCA..
15
2016/01/05 23:11:52
xtimmyx

AW11 No headlights

This morning I noticed my headlights on the AW11 has stopped working. The popups go up but the lights don't turn on and I don't get a high beam light in the dash when I turn on the high beams. I have recently been fiddling around with some minor wiring under the steering wheel so perhaps it's relate..

2016/01/04 21:31:52
2lateforPplate

Aw11 fuel pump replacement, Help needed please.

Hello,I have 14amps draw on a fuel pump that makes no noise and does not shift fuel. 4 amps is normal so I think the pump has seized. I tried spiking it fwd/rev with 24VDC but that didn't budge it. So it's time to drop the tank and replace the pump and screen. Car is an 87 N/A with AC. Job is being ..
3
2016/01/03 12:48:49
2lateforPplate

1987 AUS AW11, What is the correct front bar indicator colour ?

Hello,Front bumper indicator question. I have white/amber on the driver's side and amber/amber in the passenger's side. A look in the local forums show lots of cars with white/amber on both sides which I presume is correct for our market. 1. What is supposed to be there for an AUS car?2. Is solid am..
3
2016/01/03 07:15:08
mr2y

Low battery indicator in Japanese SW20

I found something unusual I have not seen in manuals or other MR2s in my 1990 SW20 GT import. It has a little light in the dash which looks like a yellow battery with a low fluid level in it. I notice there's a battery low level sensor mounted under the dash, so I'm wondering if the yellow battery l..

2015/12/31 15:52:53
2lateforPplate

MR2 AW11 How to unclip the Fuel sender and pump connections?

Hello,Can anyone who has done a fuel tank drop please let me know how to release the fuel sender/fuel pump electrical connections?I can see the clip feature, but pushing down on the male part or levering up the female side with a screwdriver hasn't worked. I cant find a reference in the BGB and I do..
2
2015/12/29 18:26:34
amature

power window gear

Hey, Anyone got a good power window gear for an Aw11 for sale in perth? Teeth are stripped on mine. I can buy one from twosrus but they cost 20 us which is fine but 64 us for shipping :-( else if more people need them I can order more cos the shipping cost is the same. I believe the mk2 uses the sa..
1
2015/12/28 08:07:28
Randomity

ECU options for SW20?

Hey guys,I've started looking into different ECU options for my Gen 2 turbo (will be implementing sometime mid/late next year, with luck), and really have no idea where to start.I've been reading up on Megasquirts a fair bit (thanks Knightrous for your in depth thread about them), and am definitely ..
2
2015/12/06 16:29:31

<< ..10 11 12 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account