Cooling Systems / Air Conditioning

To Bottom

Cooling Systems / Air Conditioning (p.6)
Post New Thread
Regular
petmr2

Better Intercooler piping Gen2

Ever since I had my timing belt done and the IC pipping removed and reinstalled there has been a boost leak.. I've taken the coupler out and replaced with new and same with the hose clamps... Still boost leak... I think i Have those ebay IC... So the hose is in many pieces so more places for it to l..
3
2015/10/17 22:31:19
koop

AW11 A/C Magnetic coil replacement options

I've troubleshooted that the A/C magnetic coil on my AW11 is the reason why my A/C doesn't function. Has anyone had any luck finding a supplier? I've run around to my local part stores but no luck. Does anyone know if its interchangeable with sw20 or something in the toyota line??Would like to know ..
2
2015/10/15 11:03:37
DamMR2T

SW20 Heat Exchanger choices and fitment.

Hi All, I'm looking at purchasing a Heat Exchanger to go with my Frozen Boost (Type 3) W2A intercooler and wondered what everyone thought about the options below. I have read what a few members have used, but from what I can see there is 22" width available in front of A/C condenser:PWR - I did c..
13
2015/10/11 13:45:20
ottofiddler

climate control assistance please.

Folks I have an 88 with climate control.The water valve appears to be controlled by a vacuum switch rather then a cable.Thing is the valve never opens irrespective of the temperature setting, (unless I disconnect the vacuum pipe of course).So is the heater controller stuffed? Or is this related to m..

2015/09/14 12:27:43
sprigs

What's this in my coolant?

I hope this isn't anything major...but when I was about to attempt a thermostat change I popped off the rad cap and was greeted with this... Not sure if it's oil, but if it is how did it get in? http://i372.photobucket.com/albums/oo169/sprigs_sw20/20150905_154051_phixr_zps8vf0lxql.jpghttp://i372.pho..
10
2015/09/13 19:04:50
tiff_lee

Engine bay cooling fans

Just wondering is there anyone on here using an engine bay twin cooling fan setup that engines to the the underside of the lid, are they worth having and is there anywhere in Aus to buy them? thanks, Lee..
22
2015/07/13 18:26:04
arcon

Radiator hoses

Toyota still produces radiator hoses for Mr2 sw20 and they are only around $16 to $ 30 for each hose. But rather than wait 3 or more weeks for them to come from Japan I needed them asap so I did some research on how i could get some to my door without having to get off my commodious and pimply ass. ..
2
2015/06/17 12:30:06
anti.engineered

SW20 ARC side mounts

hey guys, in the not too distant future I'll be looking to acquire two of the above to cut/weld together into a custom vertical core FMIC for my project. i'm a mad ARC fan boy and the SW20 SMIC has the best dimensions to do this. just wondering how easy it is to find these in aus. i'm no stranger to..
3
2015/05/04 22:01:37
oneian

front radiator leak

hi everyone, I have noticed a leak on the front left side of radiator. Small drips. Temp gauge is fine.. a mechanic has quoted me $550 to fix + $120 for a flush. Sounds pretty expensive.. any suggestions? Another mechanic advised I could open the top bleeder valve under the plastic bit in the frunk ..
5
2015/04/23 22:01:03
123grosso

3vzfe SW20 radiator hoses?

Nearing the completion of my 3vz conversion i am struggling to track down the last radiator hose. http://www.midshiprunabout.org/mk2/v6-swap-primer/ The above guide recommends using the hose from a Cadillac but being an American part has caused some issues with local sourcing. Are there any Austra..
4
2015/04/16 10:53:40

<< ..4 5 6 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account