2013/06/27 11:37:09
D.J
Lowered SW20 Gen II
Planning 17x8 +35's all round (not staggered boo). Will these fit fine or will will I need spacers, guard rolling etc.
 
Thanks.
2013/06/27 14:15:58
dylmrt
on the face of things yes. but each wheel is different so you may still come across issues.
2013/06/27 20:51:03
Cruiser97_80
Lowered on coil-overs or lowering springs with the std. strut/spring perch?
2013/06/28 09:11:53
Eric
those will clear fine in the rear, will be about 20mm less than flush though

as for fronts, they may hit coilovers, so you may require a 2-3mm slip on

-Eric
2013/07/16 13:10:16
D.J
Ended up with works 17x7.5/8.5 rims.
Fronts scrub, rears sit pretty flush. Will need new suspension to sort it.
2013/07/16 15:31:05
dylmrt
Where's it scrubbing?
2013/07/17 16:23:48
D.J
Not sure, probably on the inside of the guards. Would need flared at that ride height/camber.
© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Use My Social Media Account