all my stuff is gen 2 essentially... there are probably a handful of your items listed if you need little clips and stuff sitting in the red hard top.:. I'm after some revised heater pipes. These are the ones that run above the tank from the newer models with the better mounts. -
Probly only have the older gen 2 ones. Also after a couple of the frunk prop rod clips as I've developed a terrible habit of breaking them
-
usually stow the frunk rod in beside the passenger seat. No clips i would sell you as they all fail due to age. As well as the plastic trim that is under the steering column that has the little vent and coin tray.
Plastic steering trim I have a couple of so more than likely can help you out there. I have one inthe ttop and its got stripped screws so the two spare I have now will probably suit your needs The coin tray (hinged cubby thingo) is missing from mine so looking for a good condition unit to replace this.
I have one spare of these I am pretty sure.... its a two piece bracket though with the bracket underneath required to seat it properly. A strange part I need is one of the retaining clips/screw that holds the dead pedal secure. Its like a plastic nut sorting thing. Will buy the entire pedal if needed -
I doubt I have a spare one of these but you could replace it with some blingy one instead?Oh, gen 3 taillight brackets and the little plastic clips the 'bar' on the light snaps into.
Sorry no spare lights or brackets at the moment... And lastly one of the coat hooks that goes on the trim under the rear window and 2 of the bolts that hold these on would be awesome.
No spares and I have a sneaky suspicion mines missing on one side as well.Lol.Ben