2013/08/14 14:45:15
tegnoman
Hello All,
 
Buy/Borrow
 
As I have a yellow canary will require stock suspension and stock exhaust system,
If anyone can lend us these for the pits that will be great,
 
Require
1) All four corner complete stock suspension 
2) Exhaust and B pipe if it can connect to the Stock Cat (As long as exhaust under 90db)
 
Appreciated,
 
Teg
 
2013/08/14 16:52:45
twomr2`s
ive got a stock rear muffler you might be able to borrow
 
no stock b-pipe though,ive been looking for one for 4 months for mine
2013/08/14 19:25:08
chase_d
I have stock suspension here kept for that exact reason - more then welcome to borrow the set.
 
Have they actually said you need to change it?
I passed with coilovers in my CRX Twice - only thing they checked was that it had proper mounts for brake lines (no cable ties)
 
As for the exhaust - I got a baffle plate made up that sat between one of the flanges to reduce the flow and quiten it down - worked a treat.
 
What did they actually sticker you for?
2013/08/14 22:53:11
tegnoman
Yeah I require to change exhaust I actually had a gasket fabricated by a mate which had 8 10mm holes however that didnt reduce it. They tested this at 500mm and I thought it was 3mtr away.
 
Blue boys pulled over
Coilovers (was at least 100mm but who can argue that?)
Check Tyres
Switch wire on were coin tray is (for W2A pump was only temporary placed  as only recently installed)
 
1st time over
Coilovers - Require engineer certificate
Helm joints (Alex W set)  - Require engineer certificate
Demister wasnt working for front window (Second time passed)
Exhaust excessive loud
Air box (arc one as did not have stock, stating that was filter pad not pod Second time passed)
Engine intercooler fan light (did not have time to install fan so removed bulb, well they found out so dont try it)
 
2nd time same place
Use suspension set at home did not realize and was not notified by the wheel alignment shop had one leak in rear
Coolant leak near sensor radiator (fixed was not tighted as did not want to ruin the plug on aluminium at the time)
Sway bar bolt require thread showing (use a larger nut guess they want to see thread)
Alternator belt squeaking (fixed just needed tightened)
Exhaust test was done at 500mm away read 94db, law is below 90db now however last time had yellow (2003) 96db and below was fine
 
Cheers guys for being able to lend these items, I will PM you guys.
 
Appreciated,
Teg
© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Use My Social Media Account