I've got a set of ST185 twin pot front brake calipers that I want to put onto my AW11 shortly. Problem is I don't have any pads to fit them with and everywhere I look, I can only get the part number for the ST185 single pot calipers.
Any of you Celica owners happen to run the twin pots or at least know what the part number is for the pad?
 
Thanks in advance!

If i remember correctly the st184 series 2 may have actually run the twin pot brakes.
 

The 2 part numbers I found were for the early st185 and late st185
 
Early DB1181
 
Late DB1129

I forget what brand they were Aaron ,but the pads from my twin pot ST185 calipers were  part#F165 . 

SW20_3sgte

If i remember correctly the st184 series 2 may have actually run the twin pot brakes.

 
just for clarification.
 
all ADM st185 (90-93)and series 2 st184/5 (92/93)have the larger rotor/single pot calipers.
 
series 1 JDM st185 and st165s have a smaller twinpot.
 
series 1 adm st184 have small single pots
 
st162 have twinpots, but the disc is 3mm larger dia, but thinner than the st165/S1 st185

according to toyodiy the pad PN is 04465-20280
 
doesnt seem to be shared with anything else. but toyodiy is also showing st165's with singlepot front calipers.....
 
have a look on the UK websites or even twosrus supply st165/185 parts

precisegrak
I forget what brand they were Aaron ,but the pads from my twin pot ST185 calipers were  part#F165 . 

Thanks Graham, F165's point to Project Mu pads and seems to match up.

SW20_3sgte

If i remember correctly the st184 series 2 may have actually run the twin pot brakes.

 
Not true. Series 2 had bigger calipers and rotors to fit under 15 inch wheels though still had single piston. These brakes are exactly the same as the ADM ST185.
Note that series 1 and series 2 brakes use the same pads.

BTW I have lots of series 2 ADM ST184 / ST185 calipers, pads and rotors for sale