G'day,
 
I'm planning on buying a Quaife unit in the next few weeks.
I've tried doing extensive research in regards to what needs swapping over while I'm there but haven't found anything solid.
 
Has anyone done this conversion and have a comprehensive parts list?
I've heard some speedo gear needs to be swapped over and also stub axles.
 
Thanks.

If you have a non lsd e153 you don't need anything
If you have a factory lsd e153 you need the non lsd Speedo ring gear (can't buy a brand new one) also need the 16 non lsd bolts that hold the final drive on. Don't need the stub axles

Okay, my gearbox has the factory LSD.
 
I'd imagine that finding someone to split a gearbox open for the speedo gear would be hard.
Do you know whether the Camry E153 gear will work? Even any other Toyota?

There is none that I know of. I ended up buying a complete box to get it

dasic1
There is none that I know of. I ended up buying a complete box to get it

A complete Camry or MR2 E153?

A non lsd Mr2 e153

The SPEEDOMETER DRIVE GEAR is part number 33481-12100.
Currently listed as AU$47.55 from Amayama, plus 7 day shipping from Japan.
http://www.amayama.com/se...y=36&q=33481-12100

Awesome work!

Is there any mounting hardware that I should be grabbing too?

So the standard MR2 mechanical speedo drive works with this?

The speedometer gear just slides onto the diff casing and aligns with two notches.

That part number is for the LSD speedo gear 
A Quaife needs a non LSD speedo gear witch is 33481‑17010