Starting to list my build project items for sale (3sgte).
Brake upgrade for n/a or early sw20. Gen3 turbo front brake set up, callipers, pads, rotars (slotted), lines, less than 2,000kms (1,000kms if Sydney to Brisbane, rest daily driving). $350 plus delivery.
Gen2 Side feed fuel rail at 8mm bore (stock is 3-4mm), polished, dual end input with centre return (eliminates fuel pressure drop through side feed injectors when running high boost) cost $335 USD plus shipping ($60). The fuel line is professionally done with an fittings, tapped plugs (not a cheap cut and weild). Sard 800cc low impedance injectors (.75ms response, 2 hole design), currently sell from eBay suppliers for $150 each x 4. Total spent $1,200. Selling together for $550. Plus shipping.
Power steering ECU delivered to you. Bought when I had a power steering issue, turned out my issues was not the ECU. Selling $40 delivered to you.
Rear red bumper $25 local pick up or buyer to arrange pick up (www.e-go.com.au)
Not ideal for racetrack, but cool for a cruiser around the streets, rims advanti 18 x 7.5 et 45 (didn't scrub) 215 x 35 x 18 front and 225 x 40 x 18 rear. Tyres are like new, put on the rims twelve months ago and the car was put on stands within two months (second car so not daily driven). $500 local pick up.
UNICHIP piggyback (ECU) with additional module (controlled water injection). Retains factory ECU features, modifying fuel signal for a tune for the boost level / modifications you have done from factory setting. Cheaper to tune than a full stand alone ECU, selling for $200 delivered?
More and more parts to be listed, random parts like stock 3sgte blocks, cranks, Pistons and rods etc, items like rear gen3 lights (no centre panel), ct26 highflow turbos (being rebuilt at turbo shop with 360 degree oil plates, new seals, journal bearings), and many goodies. More time I get to sort my garage more will be available.
Parting my project.