Hi all, need your urgent advice;
 
I was checking thru the car as I am heading to Wakefield park tomorrow. Had the alignment done 2 weeks ago with aggressive setting and just realized the gap between the front tyre & BC coilovers only approx. 3-5mm. Has anyone had any issue with this sort of clearance on the track? Thanks.
 

Not sure about BC's, but I run KW's with about that same clearance on the fronts.
However my front wheels have absolutely no run-out.
The manufacturer recommends a minimum of 5 mm, but I have mine slightly less than that to get the right camber.
 
I would think the most important thing is to be sure the strut bolts are TIGHT.
Service manual says 188 ft/lbs - long breaker bar needed.

I just remembered this that may be of interest: 
http://www.mr2australia.com/mr2play/tm.aspx?m=91752

Reddtarga
I just remembered this that may be of interest: 
http://www.mr2australia.com/mr2play/tm.aspx?m=91752

Thanks Reddtarga.

I have about 3mm clearance also. It is fine because it can only go out not in (maxed out - camber)