I have never introduced my self here. My name is Danti been here from the day i got my mr2 last year September.
i have learned a lot about my mr2 from here and i like that.
So for the last week i have been searching and buying parts to make my brakes better. Especially after I fitted new BC Coilovers and front sway bar. It’s NA AUD 91 so early model. Been to Wakefield and Sydney Motorsport and i love the car.
What i have so far thanks for the info Deltav, Eric, and Peter Garrad.
-15/16 brake master (going to try all the upgrades below with out the larger booster for now) 
-GTST R32 front calipers
-DeltaV front kit with brake lines (on order)
-22v rear calipers with rx7 brackets and rotors (if the rotors clear my GTR 32 wheels) if they don’t fit ill just buy gen3 rear rotors.
- QFM rear pads  
- ProjectMu front pads HC800 
- DBA 315x28 front Rotors
 -rebuild kit for 22v calipers on order from Amayama 

Thanks 
 
 

Check out: http://www.mr2australia.com/mr2play/tm.aspx?m=77441
 
Cylinder kit for the 22v larger rear calipers 04479-17040
https://www.amayama.com/en/search?q=04479-17040
 

Danti
I have never introduced my self here. My name is Danti been here from the day i got my mr2 last year September.
i have learned a lot about my mr2 from here and i like that.
So for the last week i have been searching and buying parts to make my brakes better. Especially after I fitted new BC Coilovers and front sway bar. It’s NA AUD 91 so early model. Been to Wakefield and Sydney Motorsport and i love the car.
What i have so far thanks for the info Deltav, Eric, and Peter Garrad.
-15/16 brake master (going to try all the upgrades below with out the larger booster for now) 
-GTST R32 front calipers
-DeltaV front kit with brake lines (on order)
-22v rear calipers with rx7 brackets and rotors (if the rotors clear my GTR 32 wheels) if they don’t fit ill just buy gen3 rear rotors.
- ProjectMu rear pads  (about to order)
- ProjectMu front pads HC800 (about to order)
- DBA 315x28 front Rotors (about to order)
What i need rebuild kit for 22v calipers not sure where i can buy them? Toyota wants $175 and 3 weeks wait.   
Can you guys tell me whats missing from the list to make this happen?
Thanks 
 
 

Save your money just use gen 3 brakes and in put HC800 and high temp brake fluids that all need on a NA. I used this combo with gen 2 booster and slotted rotors on 340 rwkw sw20 and it stop it at Wakefield, had no fade at all. Invest in better rubber.

Welcome to the forum, it'll be great to see you at the MR2 Wakefield Park Challenge.
What times did you manage at Wakefield?

Reddtarga
Check out: http://www.mr2australia.com/mr2play/tm.aspx?m=77441
 
Cylinder kit for the 22v larger rear calipers 04479-17040
https://www.amayama.com/en/search?q=04479-17040
 

 
the problem with that it takes 2 weeks and my mechanic may not have time to fit them so close to xmas.
i can get aftermarket kit from band brakes for $170 for two calipers but not sure if aftermarket will be good.

rikkir
Welcome to the forum, it'll be great to see you at the MR2 Wakefield Park Challenge.
What times did you manage at Wakefield?

thanks rikkir
did 1.16 std just with semi slicks federal. so now with BC coilovers and new brakes i cant wait.

grosso

Danti
I have never introduced my self here. My name is Danti been here from the day i got my mr2 last year September.
i have learned a lot about my mr2 from here and i like that.
So for the last week i have been searching and buying parts to make my brakes better. Especially after I fitted new BC Coilovers and front sway bar. It’s NA AUD 91 so early model. Been to Wakefield and Sydney Motorsport and i love the car.
What i have so far thanks for the info Deltav, Eric, and Peter Garrad.
-15/16 brake master (going to try all the upgrades below with out the larger booster for now) 
-GTST R32 front calipers
-DeltaV front kit with brake lines (on order)
-22v rear calipers with rx7 brackets and rotors (if the rotors clear my GTR 32 wheels) if they don’t fit ill just buy gen3 rear rotors.
- ProjectMu rear pads  (about to order)
- ProjectMu front pads HC800 (about to order)
- DBA 315x28 front Rotors (about to order)
What i need rebuild kit for 22v calipers not sure where i can buy them? Toyota wants $175 and 3 weeks wait.   
Can you guys tell me whats missing from the list to make this happen?
Thanks 
 
 

Save your money just use gen 3 brakes and in put HC800 and high temp brake fluids that all need on a NA. I used this combo with gen 2 booster and slotted rotors on 340 rwkw sw20 and it stop it at Wakefield, had no fade at all. Invest in better rubber.

oh nice i was hoping that i could do that with no problems. what about bias and the rest

1:16 is a great time, i only managed a best of 1:16.3 last year, which was my second time at Wakefield. I'm running Federal RS-R tyres on 17" wheels, but with stock suspension and brakes. ( I do have a Beams engine though ).

Still quicker then me I was in the high 1.16.
Federal are great value for money. I've done two track days with them hope they are good for one more track day.

They should be fine for a few more track days. I've driven 1800kms to Wakefield, spent 3 days tearing around the track and driven home again. Then I've been to Mallala twice for track days (1600km round trip each time) on the same set of tyres. I'm really happy with them...