+1


[:p]

you will also note, that the brakes have been moved lower on the hubs, to keep the COG as low as possible. just like on the F430 Scuderia.

Hey Steve What size and offset are your R01s ?
Looks good mate
Phil

Here is a link with a little bit of footage taken today. I had just started the car which had not been started for a two days then ran around with the camera. I dont know what has been done to the engine but if you little closely you may be able to hear the pistons knocking. At least that what I think it is.. Any feedback on the idle and the likes is appreciated.

Thanks Thitch.
I think the offset is 40mm front and 38mm rear. I also have the offset RCA's which another10-15mm of track to the car.
The new fuel reg and filter helped alot!

Valve clearances?

Your exhaust is drowning out the higher frequencies. but it sounds a bit like a noisy head.

Stick a screwdriver or a spanner onto the valve cover and stick it to your ear. Move it along the valve cover and you'll soon find the point source. I isolated my 2 out of spec clearances like this before I even took the head off :p

Excellent. Thanks for your help. I will check on Saturday.

brake porn, love it

More porn!!
Everything was done in that little garage. No room and barely any light. Thankfully its almost finished.