I asked the tuner when I picked it up and he said the intake temps were around the 35-40 degree mark consistantly on multiple runs after eachother

quick question, I need to get rid of this 100mm BMI throttle body, would you recommend a 70/75/80mm throttle body, cant decide

My vote for throttle body size would be 70 or 75mm.
Maybe try and get an oem Toyota one so you get a quality part? I think the 1uz non traction control TB is 70mm and would work.
 
What 100mm one are you using at the moment? If its an aftermarket one they probably make the same in a smaller size which would bolt straight on.

I am using a 100 BMI throttle body so I think i will need a flange/plate made up to adapt whatever throttle body i go with anyway..

a few pics from its first mr2 run in 3 and a half years...

Bet your still grinnin your ass off

I just read through this build thread a bit more carefully than I have before, and I realised that you have done even more work to your engine than I initially thought! As you said to me before, the mods are very similar to mine.
 
One thing I am wondering though, is your engine 2.0L or 2.2L? I can't find that mentioned anywhere.
Apparently my car is being tuned on MRC's Mainline dyno this week, so it will be nice to be able to compare to your dyno result which is also on a Mainline dyno.
Unfortunately I can't compare to my own previous dyno results because MRC had a Dyno Dynamics back then, and they just recently changed to Mainline. I'm thinking that I might take my car to another Dyno Dynamics dyno after it is tuned on the Mainline dyno, to see the difference compared to my old dyno graphs.

Hey Rob,
 
yeah the engine is still just the 2L, I did think about doing the 2.2L and if I had my time over again, I would have done it.
Look forward to seeing your results, and I wouldnt be too fussed over the dyno result over your last one, as the guys I dealt with say mainline dynos read lower then the dyno dynamic dynos anyway.. 
 

Gave her a quick wash today, first one in about 9 months..

Looks good Alex.
The front bar came up ok too.