Yo, ive changed my topic because im an idiot.
 
I have a couple connectors in my frunk that I dont know what they do have a picture. The big connecters go into each other. Ive plugged them in and havent noticed a change in anything at all. With the other smaller connecter theres one on each side, and they and where they are in the picture, they're really short.
 
Is the gunk on the bottom of the dizzy normal/fine, do I need to replace dizzy or clean it?
What do my old sparks say about the engine?
 
Attached a photos of dizzy, and denso sparks, big connectors that ive already plugged and have no idea about and smaller plugs that there are one on each side of frunk.
 
Also, Im located in Melbourne, If anyone knows a mechanic thats good with MR2s, could you hit me up, please.

all the connectors are for the ABS,looks like your car doesnt have it from the first pic,small plugs on each side are for the wheel sensors..
dizzy gunk -O ring oil seal thats prolly the cause,looks like its been leaking for a while.clean and replace o ring.
the plugs-looks like water been sitting in the plug wells,looks like could be ash deposits on 2 plugs,def worn out,replace and check them after a few runs and see how they look,also compression test and coolant pressure test/flush would be a good idea if it has been sitting for a while,someone in eastern states should be able to point you in the right direction for a workshop,im in WA..