Hi all,
Does anyone have a hydraulic clutch hose to suit an AW11?  
One end is a M10 female thread (12mm nut)
Other end needs to be M8 female or male (10mm nut) 
 
If so please let me know.
Thanks,


Contact no. 0400 279 776.

Just get one made at your local brake place mate, did this myself once and it was only $40 with braided hose.

Knightrous
Just get one made at your local brake place mate, did this myself once and it was only $40 with braided hose.

Thanks Aaron, you wouldnt happen to know the end sizes would you?
I have found that its something like a 12mm female end.. is it imperial or metric?
I got a brass adaptor which is a 1/8" BSP FEMALE TO 1/4" METRIC MALE ADAPTOR but female end which is what is needed to screw into the solid line on the fire wall - doesnt fit, thread on adaptor is too corse.
 
anyone have any info on this subject.

I just took the old line in and said I wanted a new one with 100mm more length in it.

Knightrous
I just took the old line in and said I wanted a new one with 100mm more length in it.

Unfortunately thats the exact problem I have... I dont have an old one.  Would be simple if I did, could easily take it & have another one made.