Hey guys i was just wondering if anyone knows of any differences between the aw11 supercharged coolant hoses and the NA hoses?
Im looking to replace all of them and found this set on ebay:

http://www.ebay.com.au/it...m2a2aed25bd&_uhb=1

Are they the same? If not, what are the differences?

Cheers!

off the top off my head, the hoses that are different are the throttle body hoses, and the hose between the coolant filler cap and water outlet on the side of the head.

I was going to start another thread for people interested in replacing the cooling and heater hoses on a NA AW11 but seing this one has the title and some good info already I'll just tag on.  I have just replaced all the heater and cooling hoses on my Aus delivered 11/87 AW11.  My AW11 is pretty original so I wan't to keep it that way as much as possible.  The build is AW11R-WCMQFQ and the hoses I got are summarised in the following tables.
 
Coolant Hoses
Part No on Parts Diagram     Part Number     Replacement Part
16576                                16576-16011    Dayco 71296
16572D                              16572-16040    OEM still available
16573B                              16573-16020    OEM still available
16575A                              16575-16020    OEM still available
16574                                16574-16020    OEM still available
16267                                16267-16010    OEM still available
16264                                16264-16030    OEM still available
16262                                16262-15010    OEM still available
16261                                16261-15010    OEM still available
16571C                              16571-16030    OEM still available
 
Heater Hoses
 
Part No on Parts Diagram    Part Number      Replacement Part
87245A                             87245-17072     Gates 28470 + 5/8” Unicoils
87245C                             87245-17020     Gates 02-1384 cut to size
87245E                             87245-17010     Gates 19035
87246A                             87245-17030     Mackay CH1650 cut to size
87246E                             87245-17092     Gates 28470 + 5/8” Unicoils
87208B                             87208-17010     Gates 28466
87208C                             87208-17020     Gates 28466
 
I'm a little puzzled as to why the advertisement above indicates 11 hoses in the engine bay whereas I count 10.  I didn't see any I had missed while I had all the hoses out.  I replaced the water pump at the same time and I strongly recommend that this be done if replacing the hoses.  At the very least get the O rings for the 2 pipes at the back of the pump as it is very difficult to replace all the hoses without removing these two pipes. If anyone is interested, I can post more advice and photos.  It was a big job (I cleaned and repainted a lot) but it was worth it.  If anyone has other alternatives, please add to the thread.
 

Can get silicone hose kits from the UK now, bout $200 for all hoses

As noted above.
 
There are two options namely the silicone hoses from the UK or keeping the original look by getting OEM and replacement rubber hoses.  The UK set seems to include all the coolant hoses and the two heater hoses in the engine bay but does not include the three heater hoses in the frunk or the two under the body.