Hey Terry,

I'm urgently chasing an E51 passenger side driveshaft seal. Can you provide?

we are working on a 2GR V6 conversion into a SW20.

A guy in the US has made some nice exhaust headers and engine mounting brackets. anyone interested in these parts so we can buy a few sets to get the freight price per kit down to something sensible????

check out this link if interested
http://www.twobrutal.co.uk/forum/showthread.php?16150-2GR-FE-3.5L-V6-Information

need exhaust bracket....lhr and rhr are the same...4 12mm bolts hold it in place...if this helps...
i don't have a credit card...will bank transfer will be fine?

do you have any standard steering wheels?
I want one that looks like this.
http://www.megaboost.co.uk/old/pics/mr2/mycar/shifter/DCP_2783.JPG
Thank you
I'm happy with the others parts I have received from you.

currently available, 1 set of late model 22V type rear calipers, fully overhauled and painted in heat-proof paint. $375 pair. These suit the larger 94 onwards discs
New plain disc rotors to suit $160 pair

Hey im in the market for a N/A gearbox i have shafts. Dont need anything special either, just a working box. In no rush either so let me know

Also after an engine manual for a 3SGE,

Cheers
WoB

hey road n track, how much roughly do u charge to bleed the cooling system? i have a 1990 gen2 turbo n recently replaced the thermostat, rad cap, temp sensor, cleaned the radiator, new water pump, checked headgasket and did a pressure test. As of right now the temp gauge sometimes rises to bout 3/4 then after afew seconds drops back down to half. i was told that is a classic symptom of air in the system. Also just found out that my heater is bypassed so how much roughly to get that working again? thanks

hi guys just wondering how much im up for for some linkeages for swaybar to strut, i have cusco colovers, do you know how long they have to be? also im using N/A smaller swaybar at moment.