Bored fuel rails.

I'm chasing a bored out fuel rail for my Gen2 3SGTE and i'm told you guys do them. I tried sending you an e-mail but they just come back saying failed. How much do the modified rails cost and do you have them in stock??

Cheers, Justin.

listed on our web site. www.roadandtrack.net.au. In stock

RAIL3SGTE INJECTOR RAIL ENLARGED 3SGSTE GEN 2 EXCHANGE ONLY EA $110.00

My bad, I can see it on the list now.

How much to ship it to Melbourne 3429??

Edit: How much do you guys bore them out?

allow $8 postage. they are bored out to 7mm. they are exchange only, so pls send yours up. thanks

How much of an increase is it over stock?

stcok Gen 2 rail is changed from 5.5mm to 7mm which is 62% increase in area/volume

Is that the same diameter as ATS bore there's out to??

Justin, if you are comparing suppliers, then you need to do your own research. Ask ATS , whomever they are.
we get 100 emails a day, so we generally dont have troubles with them getting thru. If you want to order, just email us. roadandtrack@bigpond.com. thanks

If I buy these rails, does this mean i can still buy injectors meant for GEN2 SW20?? Just flows better right?

if you get terry's bored out stock rail, then yes. If you go a HKS rail then you would change to top feed (as apposed from side feed) injectors.

I hope this clears up matters..........
1) the gen 2 & 3 turbo rails are slightly different but both are designed for side feed injectors. You can buy these injectors in various flow ratings and they just drop in
2) the gen 2 & 3 NA rails are designed for end feed injectors and you can't swap this for a Turbo rail, or vice versa, without a lot of mucking around.
3) boring out the rail will allow enough fuel flow capacity for anything that is street driven.
4) a minimal improvment in flow to each injector can be made by converting to double end feed and using the cold-start injector port for the spill-back line. IMHO this is a waste of time on an engine with a stock ECU

Hey guys,

are these still available? i couldn't find them on your site.

no troubles. the site only list a handful of the hundreds of products we supply. email your order to roadandtrack@bigpond.com

any info on gen 1?

what do you want for gen 1???