performance for a na mr2

i was just wondering if you can supply and fit aftermarket cams for a sw20 non turbo mr2 1990 model..if so how much.....have been looking everywhere and cannot find one place....also is it possible to fit in forged pistons for this model?..as i am looking to tune up the engine without using a turbo..(restricted)..i have currently got extractos, full exhaust system and a cold air intake..i was hoping to fit big/high performance etc. cams into it to increase the performance... could you help me?

thank you

no hassles at all. if you look on our web site, you will find an article on tuning the NA engine.
we can fit improved cams but to get the best benefit you must fit adjustable cam gears
the stock ECU will not tolerate big changes, but we have cams that will be OK.
To get the max performance benefit you will need a programmable ECU and new valve springs (for better cams) this means head off. The more basic cams do not require this

what i sthe power output you would sustain from that it wouldn't be all that much would it?

ok great..and how much would that be with the adjustable cams and replacing the ecu with the one needed...and does this include the dyno tune needed with the cams?..could you give me an estimate price..and will this greatly increase the performance..if so how much by?..

how ,much would be the basic cams( without changin vavle springs or ecu).?

and how much would it be for the higer performance cams with the new valve srpings and ecu?

as well as the power output difference...

the parts prices are all on the web site. cams, springs, cam gears, cam belts, seals etc etc. New ECU's start at $2000
allow $800 labour to change cams including re-shimming. you would expect to see about 15kw improvement
allow $3000 labour to remove head, change cams, springs, re-shim, new stem seals, re-seat valves, fit new ECU, dyno tune etc. you would expect to see about 35kw improvement.

I expect to have a good high perforamce Gen 3 NA engine coming out of a car in the next few months. this might be a better deal for you as it already has all the good internals, forged pistons, lightened crank, ported head, cams, etc etc. Expect about $5000 for that engine

the gen 3 model engine sounds great but i like to build my own..thanks anyway..

soo for the better cams (3000 labor..) is that just the labor or parts included..so if i was to come to your garagae and give you my car to do all the above you sed..how much would i need to pay in total?

Vince, I clearly said "labour". I included all our dyno tuning time in this, but parts are extra----see the price list on the web site.

I think you should call or visit and we can discuss what realistically you can achieve with the budget you have in mind.

thanks

the only problem is that you are located at queensland..im in Sydney NSW..so there is no possible way for me to get my car there.. although is it possible for you to be able to send the parts down to me?.. as i can get them fitted in and dyno tuned here..althugh i cannot get the parts.. how much would iot cost me parts and postage for the cams valve springs etc.. (whatever i need) for the most beneficial cams?

thanks

you asked me about bringing it to my shop, so I gave you labour prices. I get cars sent here from melboure, and engines from overseas, so I give up asking the question about where things are

as I said before, all the prices are on our web page. www.roadandtrack.net.au.
all the cams are the same price. springs vary in price a bit, dempends on cams. I've given you a starting price on ECU, but you can pay a lot more and get better ones. the more expensive the ECU, the easier/cheaper to tune . you have to tell me what you are trying to achieve s I can work it out

if you buy a whole lot of stuff in 1 go, then I'll haggle a deal.

I'll hapily work out freight once we agree on what you want. it wont be much at all

I suggest, you look at the price list, then call me to work it out

see ya

Terry

hay terry,

my email will nto send to you for some reason?..i found the price list and would like you to send me what i need to order..

option one- with the sending bak and forth of the head..
option 2- just the parts,,

thanks alot

hi vince. got your mail. will deal with it tomorrow

email sent

ay terry, you probably busy but just wondering if you have organised a total price for the parts i need that need to be sent to me.. just so i can have a rough idea how much i need.. thanks

email sent to you last week, see above. you obviously have not got it. I can't find my copy as this forum does not seem to keep mail in 'sent box". I catnr ecall if it went via the forum or just email. what is your normal email address??????

my email address is vinnie-boi@hotmail.com..

send me the parts and total price i incl.shipment as i would like to buy them very soon..

thanks terry

email sent