Cams,valves,Valve springs shims etc

intrested in sourcing a set of aftermaket cam setup the lot for a #sge non turbo probaly the cheapest way of gaining HP without going overboard?

no hassles,
gen 2 or 3 engine?
do you have aftermarket computer?
do you want to remove head and change valve springs at same time?
everyday street car or track day warrior?

once I know this, I can select the correct cams for you

hey yeah its a street car, i wanted bigger cams and whatever else you thing needs modifying to get extra grunt, also i have the stock ECU but im also looking for an aftermaket one, but no sure abot anything when it comes to ECU's the ones for sale all say for a 3sgte?.... if you could give me a list with specs and what you think i should purchase it would be greatly appreciated. ohh and is a gen 3 off a 97 bathurst edition

also would you be able to soutce these parts?

cheers

we have all this stuff in stock.
as its a Gen 3 engine, we have a wide selection of cams.
the stock valve springs will only allow a modest increase in revs, so we are limited with the cams we can use. To change these springs requires the head to come off the engine....big(expensive) job.
we do have cams that will suit the stock springs, but you wont get a major power increase that way, as it wont rev much harder.
there are various ECU's you can use, but my suggestion would be either Motec or Autronic. If you are on a real budget, then the Wolf plug-in V4 will be OK, but it has some hassles I can discuss with you
if you are lcoal, it would be best to come visit. if not, phone me 07-32018866

HI there, any progress on this?

pm sent mate