Suspension

To Bottom

Suspension (p.13)
Post New Thread
Regular
Jono.c

Aw11 Shocks

Hey guys just joined a minute ago. Don't actually own an Mr2 but need some information.. I'm doing a coilover conversion on my corolla and found that Aw11 mr2 rear shocks are 38mm.. Now, I was told that it was the 85-87 aw11 rear that was 38mm shock but apparently that's the 42mm version, and ..

2012/09/26 18:00:42
Zediah

Suspension Upgrade to Late Model (1997) Bathurst

I first warn that this will be a "What suspension should I buy?" thread - but I assure you that I have read through every thread present in the suspension forum looking for an answer but have been unable to come up with a definitive one regarding late model SW20's. I have a 1997 SW20 Bathurst, I'm n..
20
2012/08/16 16:22:12
appledrift

WTB front shocker inserts

hi guys im still in need of Front shocker insert with adjustable damper. I have already a set of rear Koni inserts and would prefer to also have front in koni too. So im really in need of them to Finnish my suspension upgrade. If anyone has a set of front in Koni or a brand the same as Koni could yo..
2
2012/08/07 19:05:42
rb_love

Will 17 x 8.5 +30 clear coilovers, BC racing in specific?

Hi all, pretty specific question, I am currently running shock + spring combo and I'd like to switch to BC racing Coilovers, I am running 17 x 8.5 +30 front and 17 x 9 +22 rear. I'm sure the rear will clear but I am unsure if the 8.5 +30 fronts will have enough clearance for the coilovers. Has anyon..
11
2012/08/02 15:30:52
EssDub

Gen1 caster arms

Can someone please confirm whether or not you can swap the 94+ caster arms and their chassis brackets for the 89 - 91 Adjustable versions? I want to dial in some extra caster for my alignment..
8
2012/07/27 17:48:00
mms78

Kingpin angles

Had a new set of wheels installed and a 4 wheel alignment done today. One thing I noticed on the alignment report is a large difference in my kingpin angles up front. Either something is worn and needs replacing, or something has been bent. What would cause the king pin angle to vary by more tha..
14
2012/07/09 18:39:25
MRTurbo

Front Camber bolts SW20

I have stock struts with Pro Kits and Konis but want a bit more front neg camber for the twisties. Anyone using camber bolts to achieve this? eg. http://www.ebay.com.au/itm/5-81270K-EIBACH-Front-Camber-Bolts-Toyota-MR2-91-97-/160696554976?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item256a42d5e0#..
17
2012/06/19 18:07:21
nissky

Wheel alignment / Track

Adjusting coilovers at the moment, and i need to get a correct frame of reference for lining up the toe. The front track is 1470mm and rear track is 1450mm. I was assuming that this meant the front wheels were 10mm further out at each side. After a quick check this is obviously wrong. So I need ..
9
2012/06/10 18:34:24
adisco

Something really fd up! (suspension)

I have developed a sudden problem today. My car, when i accelerate or come across some rough or bumpy road, the back of the car randomly "kicks out", and my steering wheel would be 30 degree on an angle to go straight? Hope i make sense... On the freeway today, i was coming around at about 80 in a..
2
2012/06/06 12:38:01
Shardz

What struts/shocks fit SW20 from other models.

Hello everyone, I have a 1991 Sw20 Mr2 and the Shocks are gone on the rear. I need new ones to pass regency, and get my car back on the road! Unfortunately as you all probably new, there aren't all that many stock struts floating around, and as I'm a student, I really can't afford to buy new ones..
12
2012/06/01 18:45:13

<< ..13 14 - Powered by APG vNext Trial

© 2026 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account