Suspension

To Bottom

Suspension (p.12)
Post New Thread
Regular
ZIELINSKI

GC Sleeves

Anyone here running GC Sleeves on there MK1? If so what inserts have you got? Also what spring rates are you running... Cheers Z..
16
2013/01/10 21:41:03
vicsticks

sourcing end links

Hi all, Have just acquired a set of used BC BR coilovers, however they did not come with the front end links as they usually do. Was wondering if anyone can shed some light as to where I might be able to obtain aftermarket endlinks that would fit? As from my understanding the OEM links are too long...
4
2012/12/30 12:08:48
robk

Another use for 'Blu Tack'

Do you have ride-height-adjustable coilovers, and are you wondering which areas of your tyres and/or front lip would limit your ride height lowering, due to scrubbing or scraping? All you need is a pack of Blu Tack. Note: this idea is not aimed at people with aggressive wheel fitment, who are willin..
1
2012/12/25 14:44:04
lmt

DIY Corner balancing service - victoria

ive recently purchase a set of corner balancing scales to balance my car and fix up a few other issues. will be offering this service to club member in Melbourne during the xmas, new year break. Im still organising my xmas timetable but for anyone interested... PM me. this is the result of my car wi..

2012/12/07 12:10:34
stuka

Revalve of Bilstein Shocks?

I have just ordered a set of Eibach lowering springs (25mm lower) for my SW20 on Bilstein shocks. How can I decide whether I need to revalve the shocks? My first instinct and after speaking to a mate at Goodyear is to just fit them and see how it drives before doing anything drastic, what do people ..
6
2012/12/04 06:05:40
dj

rear sway bar

I’m replacing my rear sway bar with an adjustable whiteline sway bar. Can anyone tell me do I have to pull out the cross member to get to the old one or can you leave it in place...
2
2012/12/01 20:37:01
Sorensor

1990 SW20 rear springs

I'm in the process of getting a 1990 MR2 SW20 3SGTE import roadworthy and one of the things that need attention is the springs. I've ordered a stock set of springs from Road and Track, the fronts fit fine but the rears for whatever reason are too wide at the bottom and too narrow at the top. Is this..
4
2012/11/21 20:00:24
DVSTurbo2

BC Coilover - Pre-Load

Apologies if this has been answered previously... BC BR Series Coilovers I'd like to get the preload dialed in before I install. What Pre-load settings have people gone with front and rear? Are there any other adjustments that I should look at pre/post install? Cheers Guys!..
4
2012/11/18 23:20:16
purple5ive

Coilovers installed now car feels funny lol - rear end feels like its swaying around

So guys. i had the coilovers put in just now, on the way home i noticed the car sways a fair bit from side to side and doesnt handle as good as what i had it previously. the old suspension was lowered springs and they are pretty firm. i came home and tightened all the damper adjustments to full tigh..
94
2012/11/13 12:28:58
appledrift

how to tell if i have billstein shocks

Hi Ive just gotten a set of Koni adjustable shock inserts but i need to know how to tell if the car has billstein shockers. Ive looked at the shock and it had toyota and a code E?-??? couldn't identify the full code stamped on the strut but nothing more, cheers nathan..
3
2012/10/26 11:00:52

<< ..10 11 12 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account