Suspension

To Bottom

Suspension (p.10)
Post New Thread
Regular
rainystreets

AW11 front end rattle - tie rod ends, ball joints and sway bar end links

Hey MK1 MR2'ers, I'm trying to hunt down a rattle in the front end of my MK1. Pretty hard to find the exact source. I've had all the bushes replaced (see MKI MR2 Prothane Urethane Bushings - Total Kit - from twos R us) and all shocks replaced some time ago with KYBs. Here's a link to the ki..
16
2014/02/01 20:48:17
Guest

Front suspention with Veilside front bar

I just recently purchased a black Bathurst model MR2 with a veilside front bar. The front is ridiculously low and it scrapes very easily. It even scraped on the drive back from Sydney yesterday when I was going down a valley in the road at speed and hit a small pothole. I've already screwed up some ..

2013/11/27 13:46:47
kojab

Front swaybar drop link rod missing

I don’t know when this occurred but one of these drop links has fallen off my AW11 front sway bar. I discovered this on a friends hoist when trying to find a bad clunking noise when driving over pot holes. It's possible it may have been missing before I bought the car as I have not noticed any chan..
6
2013/11/24 09:36:24
Monika

Size for suspension bushes kit from TWOSRUS

Hi All, I am just about to confirm my order for the full suspension bushes kit from TWOSRUS, but I am not sure which size I should order. There is a range from 16mm through to 24mm. Can anyone tell me what is the correct size for stock suspension for my baby (94 AUD). I would not even know ..
4
2013/10/19 20:57:35
MonsieurDeux

'87 MR2 Understeer

Hi Guys After having my car for a while, im starting to get things the way that I like them, and so apart from touching things up here and there, I wanted to change some of the things to do with its driving performance Now these little cars are brilliant, and handle well, but I do notice they do und..
19
2013/10/13 11:58:52
greeno

WTB Stock sw20 springs

Hey does anyone have any standard springs they want to get rid of? Don't mind paying for them... could possibly exchange for my king springs.....the missus says they are too stiff haha cheers..
1
2013/09/06 00:10:24
MR_Deeg

AW11 Wheel Alignment SA

Hi forum folks, I've been doing some searching around for reputable wheel aligners for my AW11 and I've heard bad things about shops not having specs for AW11's or just using a vague setting that wont accomplish anything, so I'm asking for advice from you guys about a suitable place in SA to get a b..
3
2013/07/22 13:02:11
matt91112011

Camber?

My car has been aligned by a brand name tyre shop and I don't think it's right, the car still under steers! It has more camber on the rear than the front, is this right? I don't have the exact figures, but if you look down the line of the car, you can definitely see the difference. I hav..
14
2013/07/09 22:20:12
worldwalker

AW11 Front Suspension support assembly?

Finally getting around to swapping my shocks over and noticed there is a bit of play in the bearing in Front shock support assembly (the upper mount). Is this small amount of play normal? I've got the standard AW11 clunk on my other car but I'm still yet to replace the shocks and bushings on that ca..
10
2013/06/20 14:28:21
worldwalker

AW11 Budget/OEM shock replacement.

Ok so everyone has probably done the best shock, shock vs coil over to death but I'm more interested in the best budget OEM replacement. A quick search reveals there are 3 or 4 options for the AW11 (prices are delivered or local):KYB GR-2 $440Gabriel Ultra $320Monroe Sensa-trac $440 (can't find loca..
15
2013/06/17 15:54:38

<< ..10 11 12 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account