Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.46)
Post New Thread
Regular
Head gasket

tko 3" exhaust ko racing downpipe installation

im planning on upgrading my exhaust system and ive decided on the exhaustb system above.. how hard is the process of changing the exhaust .. would it be a big job for guy that knows what hes doing with all the right gear?..
4
2013/07/06 21:47:05
Head gasket

possible work to gen 2 3sgte

g'day all, so after a few long months and a boot load of cash i've finally got my 1990 mr2 back in my hot little hands. terry at road and track looked after me and i am pretty happy with the work they have done with it, i had my 3sgte 2nd gen fully rebuilt and a second hand gear box thrown in and a..
6
2013/07/02 20:11:09
Ant1

Stock or hi-flowed?

Is this a stock CT26? http://i46.tinypic.com/25i0obd.jpg..
12
2013/07/01 22:29:27
SplintWhisky

3 Rib?

So I bought this motor for 250 and the guy said it was a small port head on a big port block and i have no idea if it is a 7 rib or 3 rib (I have a suspicion it is 3 rib).So If it is a 3 rib then are there any mods that need to be done to get it into my 87 car and are there any restrictions as to th..
4
2013/06/27 21:21:50
Bringlis

Need a new alternator for my aw11

So the old alternator wasn't charging so I replaced it with a working secondhand one I though it was okay but it's a lemon as well. Any one know where I can buy a new one fast? Are all the 4age's running the same alternator?..

2013/06/21 09:31:17
Gatesys SW20

Exhaust Cam retarded on a NA

Guys I had my timing belt pulleys water pump (genuine) and seals replaced just after my exedy HD clutch and the mechanic found the exhaust cam to be a full tooth out of time, the tooth was one tooth LEFT of the timing mark. now thats retarded right? and one tooth is about 7.5 degrees? now, i read t..
5
2013/06/20 10:15:13
SplintWhisky

Engine Work Melbourne

Ok I live in the south east burbs and I am looking for some one of high quality to do a head recondition. I plan to put new valves,springs and the like to have bigger camshafts and am looking for someone who does a really good job. Also it is a 16v 4age..
2
2013/06/19 19:07:33
busman

Two different 3rd Gen 3S intake valves?

Hi guys, I'm rebuilding a 3rd-gen 3S-GE and want to buy a new set of OEM valves. I don't know what year the motor was built and ToyoDIY shows two different part numbers for the intake valves, 13711-88460 for 11/93-5/96 build motors, and 13711-88461 for 6/96-7/99 motors. Does anyone know the differen..
2
2013/06/15 17:29:32
Gatesys SW20

Timing and t belt

Hey guys My car I think is either off in timing or the belt was pit a tooth or two off It's a little doggy down low and the mechanic who did the clutch said the same Now the belt was done 8 years ago going by the receipts but since then it's only done 20xxxkms Should I get the belt done and idler pu..
8
2013/06/14 21:09:19
Engineering_guy

Running the Supercharger on a switch?

This is going to sound awfully hack/poor uni student, but it is possible to wire in a switch to the supercharger relay so to pick when it operates. Would this cause any problems/ damage to the supercharger/engine. Your help and guidance please. Mat..
8
2013/06/13 23:53:15

<< ..46 47 48 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account