Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.36)
Post New Thread
Regular
Tree

Changing FWD gearbox config to MR2 config?

There's a first for everything and that thing earlier today was driving my car home with a shagged diff... So it's happy days finding a new box now since it's not just the diff - grinding noises when decelerating even in neutral. LSD would be nice but not sure I wanna spend a fortune since I was gon..
22
2014/05/22 15:52:07
noozle

Turbo opinion??

Hey all, I have been having major turbo issues since i bought my sw20 a few years back, after rebuilding the 20g/ct26 hybrid turbo that came with the car twice already and has now completely blown again after only 3000km I am now looking for a replacement. I am looking at the kinugawa turbos as have..
15
2014/05/21 19:12:01
rikkir

Clutch recommendations?

I'm about to get a new clutch for my Beams swap.Should i stick with the genuine toyota clutch or go aftermarket? CheersRick..
15
2014/05/20 14:27:56
ashtwo

Melbourne 5sgte legality

Just wondering who has done a 5sgte conversion here in Vic and what was required for a roadworthy? I've looked at the vicroads documentation, and it seems a bit dubious, because it is a hybrid engine, although it could be interpreted as an engine that was available in this car. Would it need to pass..
7
2014/05/17 18:10:51
Buzza1995

MR2 Spyder Ultimate Build

I'm in the process of designing and building my dream an "Ultimate Build" Mark III MR2 Spyder,Currently I have decided on a Supercharged 2GR-FE V6 with a modified E153 Mark II MR2 Transmission!Currently I have made multiple sketches of the car at different angles and I am making a 3D 1/15 Scale mold..
75
2014/05/14 23:45:34
Head gasket

Gear oil change

Hey all, I'm changing the gearbox fluid to mt 90 shockproof. I know nothing about Transaxles and would like to know if the transaxle is the LSD and the gearbox. And do they both feed from the same filler hole as I can only find one, tia guys I had a look in the manual and can't find nothing about ..
17
2014/05/13 18:43:36
DougsGTO

E153 diff ratio options

Hi, I have a 1MZFE in a 1990 MR2. The current box appears to be a non LSD V6 Camry 5 speed, but I want to swap this over with a spare LSD E153 that I have, (I have the complete disk to disk rear end). I however I think I would prefer to use a taller diff ratio. Question is will the non LSD Camry fin..
4
2014/05/12 09:04:38
dwoodcob .

4agze Aw11 Engine Idle and Hesitaion Issues

Good day to you all. I recently have had a series of engine idle and hesitation issues I was wanting some advice on. Originally the car would cold start fine and continue to run like a dream while the engine was warming up. As soon as the engine was warm and the idle dipped below 1000rpm is when my ..
2
2014/05/07 13:28:37
rallypete

Does anyone have AW11 SC rear springs in their shed?

I need a set of original Super Charger springs to lift my Aw11 V6 Rear. The weight of the larger Camry gearbox appears to have lowered the car a little more than I expected. The pipe under the sump from the front bank is less than the RTA will accept and the only springs I can find are low type. I r..
7
2014/05/06 14:44:45
lrb

Cams/ Head work advice

Gday guys n gals,I need some advice and guidance in regards to my 95 jdm sw20 n/a.My Dooce is at my mechanics with the motor out sitting on a bench ready to install new clutch and lsd box as we speak.Im also installing a heap of parts that i have been collecting over the last 2 years including trd c..
5
2014/05/06 09:02:00

<< ..34 35 36 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account