Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.33)
Post New Thread
Regular
mista2

3sge Beams Redtop VVTi Solenoid

looking to buy one. toyota quoted me $200 and a month. money isnt the issue its the time. Also for future reference for the sake of it. do other vvti solenoids fit? i know i can get hold of the 1jz vvti intake solenoid not too difficultly and it doesnt look any different but does it have diffe..
6
2014/10/02 16:34:52
MR_Deeg

4AGE Conrod Bearings

Hi folks, looks like i'm rebuilding a 3-rib bigport motor.. went down to repco today and they told me no one will have the parts for these earlier motors.so i'm wondering if anyone here has any good places to go to find the bearings i need (40mm vs 42mm) also thought on the way home since these bloc..
3
2014/09/27 01:04:52
IMR22C

Lifter measurements

G'day all, today I measured my Gen3 lifters before I install my cams just incase I need to get new shims.I measured the lift and shim together. Intake (from cam gear back) 1. 6.02 6.022. 6.01 6.063. 6.01 6.024. 6.01 6.00 Exhaust (from cam gear back) 1. 5.92 5.932. 5.97 5.983. 5.99 5.944. 5.95 5.99 T..
3
2014/09/23 13:06:04
BTMR2

Wanted: Head Gaskets and Head for a 3SGTE

Hey all,Am currently trying to tidy up the engine bay in my MR2 and have hit a bit of a snag. I have removed the Head off my 3SGTE engine for a sand back and re-spray but seems the previous owner has sprayed it with god knows what and I cannot remove the material from the cover. So I am looking at j..
12
2014/09/17 22:30:36
jim911

Aw11 misfire and engine warning light

Hi guys Sorry it been so long since I have been on here I finally have my aw registered and running again after 5 years :) I have come across an issue At the moment There is a slight misfire in the engine only once up to full operating temp All the way through worm up it runs sweet as a dime The eng..
1
2014/09/13 22:42:28
IMR22C

Which Camshafts

Hello All, I'm currently doing a timing belt and I'm also waiting for a cam cover gasket to get delivered. I figured while I'm here, what better opportunity to throw a set of cams in. I'm thinking around 264 duration wise to keep driveabilty on the road, but I'm not sure about lift. I'd rather not h..
5
2014/09/07 15:13:12
Mrskylighter

sw20 transverse 1uz swap tutorial

Thought some of you guys might enjoy this thread on mr2oc. http://www.mr2oc.com/showthread.php?p=5849770#post5849770 Guy is part way through explaining a transverse 1UZ V8 swap that he's either in the middle of or completed...
2
2014/09/02 22:13:00
Biggie1494

Gen3 3sge Cam Cover Gasket Replacement

Hi all, So I have been trying to find information on replacing the Cam Cover gasket + O-ring gaskets (spark plug area) for a gen3 3sge (as mine are leaking) an I can't seem to find anything! Is this a difficult job? As I have been trying to get quote from mechanics but they don't seem to have a clue..
9
2014/08/28 09:13:20
Gatesys SW20

Which clutch kit?

Hi guys, Luck has not been on my side, Trying to sell my baby, She does not want to go, Handbrake cable snapped last night- so im going to fix that, Today however my clutch started to slip, I have had a slight oil leak that was my tappet cover gasket thats being re done this week for toyota warranty..
12
2014/08/24 16:58:09
MRTurbo

Gearbox oil E153

What oil are you guys using in your E153s? I've got the early box and noticed the shifting is getting a bit rougher. It's got Nulon SAE 80 smooth shift in it now, but I think it might need replacing.Cheers...
1
2014/08/20 21:18:50

<< ..31 32 33 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account