Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.32)
Post New Thread
Regular
rookie

Engine Rattle/Burning Oil/Running Cold

New the site, new to the '2, cut me a break if I sound wet behind the ears.So my 1993 SW20 3SGE (non turbo) that I've had for 8 months recently started making some funny noises and I'm not sure what's up so I figured I'd consult the vast wealth of intelligence that is the internet.Firstly, during ac..
4
2014/11/17 16:26:23
rikkir

Beams fitment advice needed

Hi guys,I believe i have to modify the strut tower in my SW20 to clear the timing belt cover for the redtop Beams.Mister2 has sent me some pics of Mandalays and his installation, but i'm wondering how others have done this?I don't want to just hammer it in, i'd prefer to keep it neat if possible.Any..
4
2014/11/17 13:56:47
TGM

Looking to rebuild/replace my turbo - who do I go to?

Hi guys, The seals in my CT26 (rev II, japanese import, 1992) have gone and I'm burning lots of oil. I'm looking to get the turbo rebuilt or replaced, does anyone have any suggestions? I'm in Melbourne. Eastern turbo's quoted me about $1000 for a rebuild. do and exchange for about $600 but they have..
10
2014/11/15 10:13:31
appledrift

2GR-FE into an SW20

Hi guys just wanting to find out what is involved in putting a 2GR-FE into an sw20. I will be putting it in myself and i have an auto elect mate who can wire it up. If anyone can point me to someone who has done the conversion and how much that would be great...

2014/11/09 07:57:04
drb

info on oil cooler system AW11

Hi guys. I have an 1987 AW11 that has been upgraded from a 4age to a 4agze by the previous owner who still used the C32 gearbox that has finally given up on me. so I purchased a 1988 half cut with a 4agze and E51 LSD gearbox to do a total transplant. But I have noticed that the 4agze that I have tak..
2
2014/11/04 13:03:40
Ballzy

Newbie needs help (and so does the car!)

Hi GuysCan anyone please recommend a good engine guy on the gold coast. I just bought an AW11 that's had a 4AGE silver top transplant, it's got the big K&N pod filter and an oversized exhaust. It (I think) has a standard (silver top) ECU. The problem, it runs so, and I mean sooooooooooo rich, it..

2014/10/28 19:35:39
darkstoria

Can't get my 1991 JDM MR2 to start anymore :(

Hi guys, Okkkkk I'll try go through this as much detail as possible so I can try get to the bottom of it as fast as possible ;/ Car: MR2 JDM 1991 3SGTE A few weeks ago my car started misfiring/hesitating as well as horrible stuttery starts (Cold starts have always sorter been rough). E..
7
2014/10/24 05:18:03
millsy

Can you help me diagnose what's wrong with my SC12?

So was driving my car home and noticed the supercharger was making some extremlely metallic grinding sounds under lightish load. A quick bit of diagnosis (pulling the cable to the supercharger) confirmed that it was the supercharger making the noise. Now I can't tell if it's the pulley at the front,..
3
2014/10/23 08:55:55
Steve_A

Is Installing a Manual Boost Controller Without Retuning Safe??

Looking to install a manual boost controller and while getting it in and disabling T-VSV is something I can do myself I'm wondering if its safe to do without immediately getting the car retuned? As far as I know (and I don't know much about the turbo game yet) if I was running an AFM then the comput..
7
2014/10/21 19:59:30
PeteClarky

White smoke after acceleration

I have a 1992 MR2 turbo with about 230,000 kms. When you floor it, it pulls perfectly and pulls hard but if I floor it really hard then the next time I stop (at a set of lights or something) white smoke starts to pour out of the exhaust. When I just drive normally there is no smoke, it never smokes ..
4
2014/10/21 16:26:38

<< ..31 32 33 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account