Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.23)
Post New Thread
Regular
petmr2

Solid brass shift bushing, should I install?

Well after installing the short shifter and putting in Redline gearbox fluid, I'm pretty happy with the gear shifting... I have the solid brass shift bushing that came with the car but never installed... Is it worth installing? I read some people had issues with grinding etc afterwards? Anyone have ..
29
2015/10/28 19:25:11
Highlander

CRW Upgraded axle cages

Anyone bought CRW (Chico Race Works) upgraded axle cage kit for an SW20? I purchased a set in November 2014 and have just got around to opening the package to install. They look identical to the cages already in my car. Also the ages in the purchased kit are decidedly second hand to the point of eve..
17
2015/10/28 16:00:55
vasilimr2sw20

Engine issues

Hey everyone My names Vasili ive owned my mr2 sw20 1991 gen1 for about half a year and cant remember a day when its run well. :( So whats the problem? During acceleration if you throttle more than a tiny amount the car jolts violently. The engine cuts out but keeps running because of the momentum i..
3
2015/10/26 14:36:18
123grosso

3vzfe Head Machining

As my 3vzfe sw20 had a blown head gasket i feel i should get the heads machined to increase the compression of the engine.I've tried doing some research into how much i should get machined off the heads but i havnt been able to find any numerical values so any help is welcome. Also if anyone knows a..
2
2015/10/25 09:03:11
Danti

please help me remove oil filter urgent sw20

Hi my first post here and i need urgent help to remove oil filter on NA 3sge MR2.i got the car a week ago and trying to get it ready for some track days. not going to be road car.this is my first time on mr2 and cant get the oil filter out. i used oil filter Wrench cant get Grip. also with screw dri..
25
2015/10/21 09:38:48
KC

Can I get a seal?

MR2 2000 Spyder sequential manual 5 speed. Have a leak in Gear Shift Actuator Assembly GSA . It is between the clutch cable and the clutch release cylinder. Can I replace the seal? Research told me I have the replace the whole GSA unit!! Help needed asap thanks..
2
2015/10/21 07:36:14
spyderlady

Do I spend 10k on repairs..? Feedback sought

Hi everyone, I'm writing regarding a thread I posted (on spyderchat year on my 2001 MR2 Spyder, which is British racing green in colour, black convertible roof with tan leather seats. Since the initial post the car is now barely drivable and investigations seem to suggest the problem could be the..
7
2015/10/20 10:17:06
stueyJJJ

Check out my exhaust?!

So ive had my mr2 for about 3 weeks now and bought it with this exhaust... no mufflers... sounds mad! BUT i like a nice quiet ride so i can hear that turbs loud and clear :-D Heres a couple photos. Anyone keen on swapping for my loud black straight pipes? Or even have some stockies lying around? Id..
3
2015/10/19 15:54:05
TwoDogs

Wanted: standard SW20 muffler

Hi,the after market muffler on my car has had all the packing blown out of it and is now too loud with a nasty raspy resonance. Hoping someone who is happy with their aftermarket set-up doesn't need their stock muffler anymore ??..
3
2015/10/19 15:24:20
petmr2

What's this connection that's hissing?

I noticed hissing coming from this hose type connection but cannot see any loose hose... I've cut a piece of hose and plugged it off... Anyone know what it is and why it was unplugged and where me plugging is the right move? Sorry its near the intake..
4
2015/10/15 09:11:55

<< ..22 23 24 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account