Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.20)
Post New Thread
Regular
ro55or

97 MR2 Bathurst (NA) exhaust system question

Hi,I have been meaning to put in an aftermarket exhaust into my NA SW20 for a while now, but the only exhausts I've found are for 3SGTE. Does that mean it will not fit the 3S-GE? Not too familiar with the exhaust systems on those engines as I haven't had a chance to take it apart yet. There's a real..
11
2016/01/15 00:16:30
chewbacca888

Low Idle

Hi there Just wondering if my 500rpm idle is normal? And if it isn't, what could the problems be? No error codes have popped up..
2
2016/01/12 20:06:48
Danti

your opinion on my compression test PLEASE (track use)

well some of you may know my story. i have NA 92 3sge. with 190k. got it three months ago and did new Pads, 15-50 penrite oil. GL4 75-90 gear oil,plugs and leads, also new rs595 Federal semi slicks took it for a track day and had lots of fun and car did great job.but i did lose just under a litter o..
6
2016/01/12 17:03:52
Danti

where can i get cam cover bolts from. like DeltaV

Hi doing my cam cover gasket on 3SGE next week to fix my oil leak. where is the best place to buy new Bolts that are better then factory.thanks..
2
2016/01/12 14:36:08
petmr2

Really bad hesitation, bogging on boost

Well I thought it was a boost leak as the symptoms feel the same. It bogs and hesitations. Feels like major turbo lag and then slight power kicks in and out and I can see the boost building but no power... I've used boost leak tester and no leaks... Even changed all the t bolts and couplers. Same pr..
18
2016/01/08 21:47:40
ron888

Newbie need help saving his Spyder...

Hi Everyone, New to this forum, I own a 2005 MR2 Spyder (SMT) I have join cause i require some help... !!! My SMT Spyder clutch was slipping, and due to be changed, however no mechanics was willing to go near the SMT unit...So i took upon myself to change the clutch, i have got everything changed an..
5
2016/01/05 14:07:39
PplaterSW20

HELP! Turbo making police siren noise

Hey guys my turbo has started making a police siren noise just before boost kicks in and after I lift off and I'm wondering the reason? My car also has blueish smoke coming from the exhaust not constantly but every now and again, wondering if the two issues could be linked? Any help would be appreci..
2
2016/01/04 00:43:34
IMR22C

Engine break-in oil

G'day all, I've finally gotten the motor and gearbox mounted back into the car. Once all the ancillaries and a few other issues are sorted I'll be able to start it up. Just wondering what brand and weight people suggest for engine break-in oil?And whether it's worth running two lots of oil through i..
5
2016/01/02 12:55:30
Steve_A

OEM Throw Out Bearing Part #?

I'm looking to install a new clutch and the consensus seems to be not to use the aftermarket throw out bearings in the clutch kits and instead use a new OEM throw out bearing. Does anybody now the part number for a throw out bearing to suit a 1991 Turbo LSD gearbox?..
8
2015/12/23 19:55:26
Surgeon

4AGZE Idler Pulley Replacement

So, the bearing on my alternator idler pulley is stuffed and the car now sounds terrible if it's driven longer than about 15 minutes. Quoted $638 for both idlers from Japan. Anyone know where I might be able to find one at a slightly more reasonable price? Apparently they're not the same size as the..
9
2015/12/18 07:20:09

<< ..19 20 21 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account