Engines / Exhausts / Gearboxes / Differentials

To Bottom

Engines / Exhausts / Gearboxes / Differentials (p.19)
Post New Thread
Regular
chilliscool

Quick question - 1.5way aftermarket lsd for 90 model open diff ??

Hi all,Just a quick question, are there any aftermarket lsd options to buy a 1.5way which will suit a 90 model e153 which is an open diff ? I've had a quick look and can only seem to find either 1way or 2way lsd to suit.Has anyone had any experience with a 2way before ?? I'm guessing 1.5's are defin..
19
2016/02/04 19:00:48
Danti

Anyone looking for 75-90 gl4 I found supplier

Just to help anyone looking for 75-90 gl4 AMSOIL CALL John on 0423131170 from padstow Sydney. Really nice guy. Paid $25 per bottle 946mlhttp://uploads.tapatalk-cdn.com/20160203/247c385ac61e1025cfedcbcfc463c1a5.jpg Sent from my iPhone using Tapatalk..
7
2016/02/04 18:57:05
WilliamsRace.Co

2GR-FE - E153 Recomended Clutch kit?

Hey in the near future im hoping to tackle a full 2GR conversion on my SW20 and im just wondering if anyone has a clutch kit they would recommend? and any advice for me regarding the swap would also be swellThanks!..
4
2016/02/02 16:44:07
Danti

Can't find exhaust shop to fit headers. SYD

well I went to three exhaust shops and asked them to take my old headers and B pipe and fit my new ones on. They look at the car and they like hard job or no thanks. Or need the car all day to do it and hrs of $$$$$. I need a shop that has done it before and know what they have to do. So if you know..
8
2016/02/02 10:31:07
PplaterSW20

Need New Turbo

Heys guys, today my turbo **** itself when i was driving home as well as the wastegate(i think), there is no boost at all and a loud whining and air noise, i was aware of a small boost leak but hadnt found it yet as well as an oil leak from the turbo. Anyway, if anyone is selling a ct20 or ct26 seco..
1
2016/01/24 21:24:03
MCT_MR2

4A oil control - who's done what?

Hey guys, Im just curious as to what people have done with their aw11's to limit/prevent oil starvation. Reason i ask is a have spun and destroyed my no1 bearing. Thankfully crank is ok, and its just a bearing, but this is the second motor i have had issues with. Oil pressure is fine, and ..
11
2016/01/23 16:47:21
DamMR2T

Inlet manifold flow for a Gen3

Does anybody how well an ST215 inlet manifold flows compared to other possible manifolds such as Racer X, JUN etc. I am building a 5SGTE and have an ST215 inlet manifold I was going to use, but obviously don't want it to be a restriction.I have read it is bette than the stock Gen3, but if I am going..
4
2016/01/22 08:59:33
IMR22C

Longer throttle cable

G'day all, five or so years ago when I did my Gen 3 3SGTE conversion, I used the 91 NA with cruise control (not fitted) throttle cable. I was able to make it just work by making a new bracket, to secure it to the throttle body inlet, and by routing the cable between the two intercooler pipes to get ..
3
2016/01/20 12:17:46
Vadim

misfiring / white smoke

Hi guys. Could you help me please. I have MR2 with 3s gte gen4 engine. Couple weeks ago while standing and idling after a good run I noticed a white smoke. I stopped the engine and turn it on again - smoke's gone. This time I was setting new audio unit and turning engine on and off a few timesIi not..
3
2016/01/19 20:59:59
track_mr2

Aftermarket Turbo Manifold vs Stock 3sgte

I've got a Gen3 3sgte. I was wondering what difference does an aftermarket turbo manifold make in terms of performance over the stock manifold?..
14
2016/01/18 20:57:18

<< ..19 20 21 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account