ARCHIVED MESSAGES

To Bottom

ARCHIVED MESSAGES (p.19)
Post New Thread
Regular
Road and Track

engines available as of may 07

various engines available with various levels of rebuild. Please email us directly if you have a specific interest. Can sell most of them outright or exchange. None of them have ancillaries like starter, alternators or manifolds. Note, "short" means no head, 4AGZE. short motor , block hone..
15
2007/01/07 16:53:14
90rdn

computer

hey just wondering it you fit/tune after market computer for the mr2 what brands and prices Gordon..
8
2007/01/05 16:07:27
Road and Track

ST185 RC 1/2 cut parts

one of our good customers has bought a ST185 RC 1/2 cut for parts. email us with any bits you might want and we'll see if we can help. Front bar is already taken..

2006/12/22 19:02:29
Road and Track

Rebuilt turbo engine available

we have a professionally rebuilt MR2 turbo engine, 1991 version. new rings on teflon coated pistons, bearings, cam belt, belt tensioner & idler roller, block chemically cleaned and honed, new core plugs & water pump, valves reseated, new valve guide seals , head faced etc etc. fully assembled $2300 ..
18
2006/12/22 19:00:32
Road and Track

long wheel studs now in stock

we now have long wheel studs in stock to suit most toyotas. these are often needed when non standard alloy wheels are used with either wheel spacers or taper seat nuts. we have seen several cars where the wheels were held on with only a few turns of the taper seat nuts beacuse the factory studs are ..
2
2006/10/20 16:25:19
Road and Track

used 3SGTE engines

we have 2 second hand engines at present. 1 is from a ST185 GT4 and the other from a MR2. One came from a 1/2 cut that had 86,4000km on it and was completely stock. The other was in a rear cut so we have no idea of km's . We have not had either running but will take the sump off and check bearings a..
12
2006/06/25 15:31:35
Road and Track

new products & services SW20's

Malpassi rising rate fuel regulators. essential for turbo upgrades $195 Gen 2 turbo factory injector rails with enlarged bore , bead blasted & looking great . $110 exchange only Gen 2 turbo TVIS plates with plates & shafts removed, holes blanked, bead blasted and looking great. $110 exchange ..
1
2006/04/04 17:42:34
MR2QIK

Castor Adjustment in 94 Gen 3 MR2 Turbo

Hi Road & Track, I'm looking for a way to adjust castor in my imported 94 MR2 turbo. I believe some of the earlier models allowed for castor adjustment, but mine does not. Research has shown that Tein Tension rods will allow me to adjust castor, although do you know of any other products? Rega..
8
2006/01/06 19:31:26
Road and Track

Cometic gaskets back in stock

we now have back in stock a limited supply of US made Cometic 3 layer metal head gaskets. $190 incl post to eastern states. These are 1mm thick and fit Gen 1 & 2 turbo and non-turbo engines. They DO NOT fit gen 3 engines (Oct 93 onwards), but we have another source for Gen 3 metal gaskets if you nee..
2
2005/11/30 08:55:27
Road and Track

Hi performance cam belts now in stock

we now have stock of the latest cam belts made in Japan for Gates USA. These reportedly have 3 times the strength & durability of their current best belts for the 3SG. Designed specifically for modified and turbo engines. Racy bright blue colour. $115 posted anywhere in Austrlaia. We also stock belt..
1
2005/08/06 09:01:35

<< ..19 20 - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account