******** WANTED TO BUY ********

To Bottom

******** WANTED TO BUY ******** (p.7)
Post New Thread
Regular
nut.161

Wtb: dead/broken e153

Chasing a dead/broken e153 for parts, mainly need the selector shaft, diff, diff cover and a few other internals. In qld would be best...
4
2021/04/30 19:08:05
Blade

WTB REV 3 Rear Calipers

Hi All, Just after a set of rear brakes (Just calipers) (22V) for a SW20 MR2 Located in NSW but happy to sort shipping Contact via PM TIA..

2021/04/25 16:51:44
khanh

E153

Hi guys/girls. Any selling an e153 transmission? If so please text/call me on 0409732047 Cheers Khanh..
2
2021/04/14 13:14:48
onesomelowkite

Want to buy SW20 Turbo Gearshift cables

Hi: Anyone has the Gen3 Turbo gearshift cables for sell, please let me know. Cheers Ben..

2021/04/08 12:43:30
Chalon

[ADEL]WTB: 2ZZ Headers/Extractors

Hi guys, I've had my new ZZW30 with the 2ZZ swap tuned with the Power FC, and it makes a beastly 95rwkw! That does appear a little on the low side from what I hear for a 2ZZ. It appears that I have 1ZZ headers adapted to suit the 2ZZ, and this is quite a restriction. I'm after a set of 2ZZ headers t..

2021/03/29 16:04:25
tuban

WTB - 3sgte gen II valve lifters/buckets

Hi,I found that three of the valve buckets/lifters in an engine I'm rebuilding had corrosion on the top edge (left too long in wreckers yard) and I want to replace them. Anyone have some buckets for sale or can suggest to me where I might get some. I'd prefer Aus as I'm now stuck in my rebuild. I'd ..
1
2021/03/23 21:52:48
Richieyellowmr2

IGNITION DISTRIBUTOR CAP

Chasing new IGNITION DISTRIBUTOR CAP For non turbo 1994 gen 3 engine..

2021/03/21 01:05:31
tiff_lee

WTB: Dashboard (i'm located in WA)

I've started gluing my current dash together in an effort to kerb the foam that is disintegrated but curious if there is any good dashboards out there and at what cost? I'm located in WA. Cheers...
9
2021/03/15 10:09:39
Admin

WANTED - SW20 ABS front hubs/knuckles, rear ABS knuckles and turbo ABS driveshafts.

I need SW20 ABS front hubs/knuckles, rear ABS knuckles and turbo ABS driveshafts so that I can implement traction control on my race car. I don't need sensors.Let me know if you can help. It's OK if the knuckles/hubs need new bearings and the driveshafts need rebuilding. I will be reconditioning it ..

2021/03/08 16:56:42
Richieyellowmr2

Want tensioner bolts

After tensioner bolts my came off For 1994 Bathurst 3sge..
8
2021/03/02 20:40:18

<< ..7 8 9 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account