******** WANTED TO BUY ********

To Bottom

******** WANTED TO BUY ******** (p.129)
Post New Thread
Regular
david

wanted E51 LSD drive shafts and supercharged engine Air con compressor

Hi All I am after a set of drive shafts to suite the MR2 aw11 e51 lsd gearbox and the supercharged air con compressor with the mount bracket, bolts for mount to block and compressor to mount and the flexible hosed from the compressor to the rigid lines. cheersDavid..
1
2013/12/24 17:46:22
appledrift

cheap front bumper skin for sw20 mr2 located in victoria

hi after a front bumper skin for my sw20 mr2 as im getting car re sprayed. Old bar is split in right corner above indicator, doesnt matter colour or condition of paint as its getting re painted from bare plastic, i dont need lower lip either. Im located in Pakenham / beaconsfield Victoria cheers nat..
3
2013/12/24 17:44:45
darkstoria

WTB: ct26 gaskets! !

Hey does anyone have or know where I can get the gaskets for a ct26 turbo? Need urgently! ! Cheers..
2
2013/12/24 17:44:05
Mrskylighter

AW11 front balljoint spacer

Hi all, I changed the front ball joints in my car yesterday and noticed that on one side the spacer that sits between the hub and ball joint was missing.Does any one have one kicking around I could buy? I'm not sure what impact not having one is but I'd like to get it sorted soon as possible.Same as..
1
2013/12/24 14:16:35
Gatesys SW20

WTB: LEFT FRONT CALIPER

In Need of a caliper LHF for my 92 NA has abs, was completing the brakes new rotors and ebc redstuff pads and noticed one of my pistons has seized and will not go back in, tried pumping the pedal with the other pistons clamped in, but the other pistons comes out, but will not go back home. Need one ..
7
2013/12/24 09:04:52
grl570810

Radio power / volume knob

This will sound daft (most of my posts do).The on-off / volume knob has gone missing from my original fitment radio cassette CD player on my '93 SW20. My own fault it had got cracked and loose and I kept meaning to fix it up with some filler but never got to it and the last time it fell off it vanis..

2013/12/23 14:13:55
Craig1978

Sw20 bov adaptor

Hi guys, I'm chasing an adaptor to suit the standard mr2 sw20 bov piping. I have a hks ssq bov but don't really want to cut and weld. I have seen the turbo smart adaptors but can't source one anywhere. Thanks..
1
2013/12/23 10:32:16
Panda auto

Gen2 rev 2 3sgte manual ecu wanted,92/93

Hello, Please PM me if any one has the ecu for mr2 sw20 turbo, gen 2, rev2. Thanks Ares..
3
2013/12/21 10:40:47
IMR22C

Gen3 3SGTE Longblock

Hey guys, chasing a Gen3 longblock for an engine build I'm planning.It can be in any condition as long as the bores aren't scored or any spun bearings. I'm located in Newcastle and would prefer to travel no further than Sydney. Let me know what you have,Cheers...
1
2013/12/19 17:49:29
darkstoria

WTB: CT26 TURBO

hey guys after a ct26 turbo cheap. Throw me a pm or swing me a text on 0431274486. Located sydney. Cheers..

2013/12/19 08:15:32

<< ..127 128 129 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account