General MR2 Stuff

To Bottom

General MR2 Stuff (p.24)
Post New Thread
Regular
Locked On

Pedals - aftermarket

Hey guys , has anyone dressed up the pedals on the SW20 ? I had some old silver sports ones on the car when i got it ... fairly worn. ( only on the brake &clutch )I just got some new Momo pedals and the brake & clutch fitted up fine but of course the accelerator is a plastic pedal on a steel..
5
2016/10/31 22:00:07
Adam2

Aw11 part

Hi I am after a rear boot lid with spoiler for a MK1. Anyone know where I could find one here in Aus? Thanks Adam..

2016/10/25 18:35:45
TRD2000

hi all.

G'day guys I'm new so i thought i'd chuck a post up. I've got a '90 MR2 GT with a few mods and somewhere over 220rwkw. normally in tas but i'm in Melbourne for work at the moment. boosts coming in a little late but its tuned soft to look after the gearbox... think i could use a smaller a/r turbine h..
31
2016/10/18 22:15:24
banner

Aus Supplier of 3SGTE Lightweight Alternator bracket

Does anyone know of an Australian supplier of a lightweight 3SGTE alternator bracket? Like the racerx version...
1
2016/10/09 21:31:47
maccardo94

SW20 power steering fluid

Hi guys..my p\s light came on after a big drive up mt nebo..so its empty..where can I easily buy the Toyota power steering fluid it needs Thanks Matt🍕..
1
2016/10/02 05:35:20
Richieyellowmr2

Mr2 1994 size rims

Hi im got 18in rims on my mr2 .which is great.just wonding if i put 16in rims what will that change better handling or performance.?????..
2
2016/09/20 14:06:09
Ray-MR2

10 things to know before buying an SW-20 MR2

This article comes from US mag Road & Track.These mid-engine sports cars might be one of the best used car deals available!http://roa.h-cdn.co/assets/16/37/980x490/landscape-1473946797-images-toyota-mr2-1989-3.jpgIf you're in the market for a mid-engine sports car, buying new is pretty pricey. E..
3
2016/09/17 20:37:29
RICHIE

Clutch pedal got soft

Hi need sum help my mr2 1994 non turbo.my clutch got very soft what does it mean what do i check could sumone give me advice..
27
2016/09/17 20:36:13
P E T E

WTB: CT20B Turbine housing

If anyone has a blown CT20B, I'm chasing the turbine housing. I'm currently rebuilding mine and have found cracks in the divider. It can be re-used, but if I can get my hands on a non-cracked housing, it would be preferable. I'm located in WA. Cheers...
2
2016/09/14 10:17:55
IMR22C

Trolley jack recommendations

G'day all, I need a new trolley jack. My current one fouls on my Legalis R exhaust when trying to reach the rear crossmember. Does anyone have any recommendations for low profile trolley jacks that are still low enough at the pump end to clear a low exhaust? The car isn't ridiculously low either. ..
14
2016/09/12 07:59:32

<< ..22 23 24 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account