Electrical / Ignition / Fuel Injection

To Bottom

Electrical / Ignition / Fuel Injection (p.9)
Post New Thread
Regular
darkstoria

Power FC AP Engineering HELP!

GUYS NEED HALPP:Ok Here's the deal.... running an AP Engineering Power FC on a Gen2 3SGTE... The car is a 1990 so its a rev1 (i know AP Engineering one is designed for the rev2) so I repined it to suit as they both use gen2 motors and have seen it done before.Aimed to do the following:MAT sensor con..
1
2016/11/30 19:28:34
rock

fuel pressure

HiIs anyone running a walbro 255 fuel pump with a fuel pressure gauge?If so, do you have fuel pressure once engine is switch off?..
3
2016/11/19 22:49:41
aylmii

AW11 supercharger does not engage

Hi guys Did a dyno run and realized that my SC is not engaging... Where is the supercharger relay located?- would that be the first thing to test/replace? RegardsA..

2016/11/02 11:25:46
maccardo94

Power steering problems

Hi guys Seen this is a common problem but my power steering light came on..checked the level was low but not low enough.anyway I filled it up and the light is still on.. What else could this probably be. Any suggestions or help would be great. Thanks Matt🍕..
2
2016/10/28 20:25:34
B24

Dash conversion 3SGTE TO 3SGE

I have a hardtop 3sgte which I have been preparing for registration. The original dash was modded with gauge faces which did not suit my tastes so I have bought a replacement dash. As the 3sgte dash is difficult to find, I bought the Australian delivered 3SGE dash. Problem is, hardly anything works...
1
2016/10/28 15:26:46
Danti

what are you guys using for lap timer device or app on track

what are you guys using for lap timer on track.been to few track days and using Gopro is great,i would love to record lap times.just wondering whats the best value for money lap timer device or app on iPhone.i have the full paid app Track addict bur not sure how to use it or is it any good.any info ..
12
2016/10/25 19:05:09
kameleon

Lightweight alternators....

I need to move the alternator on my 3SGTE to make room for other items so i am taking the opportunity to replace it with something lighter (i hope!) I have power steering so have the larger alternator (p/s is staying)..
32
2016/10/03 22:06:03
petmr2

How to remove bottom bolt for coolant tree?

Hi all, I need to replace my coolant tree. I was able to remove the top easy but the bottom bolt is difficult to reach. Any offer any suggestion. Would taking the distributor cap off give me enough room? Any risk with throwing off ignition timing from taking the cap off. Or is there a better way?..
3
2016/09/15 10:02:20
kiwi

Help with AEMTuner and EMS4

Reposted in urgent help section..

2016/08/31 15:11:53
Hoonsy

Gen 3 3SGE Spark Plug Gap?

I gave it a google search, and there's a lot of debate between 1.1mm and 0.8mm for the electrode gap. I've been running a set of Bosch P8-4 spark plugs for about 6-8 months now thinking I bought the right set. People are claiming that 1.1mm is suitable for the N/A engines, with the turbos running 0...
16
2016/08/23 16:24:06

<< ..7 8 9 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account