Cooling Systems / Air Conditioning

To Bottom

Cooling Systems / Air Conditioning (p.12)
Post New Thread
Regular
C Jay

3 inch intercooler piping

Has anyone ever done this and would it be beneficial? I am upgrading to a air to water cooler kit and the intercooler has a 3 inch outlet. Would anyone recommend what I should do? I am thinking about using silicon reducers and either: - reduce the piping size at the cooler to 2.25/2.5 (which means ..
6
2012/12/05 00:26:11
sprigs

Enginebay A/C clutch connector

When I was inspecting my engine bay I notice there was a plug not connected to anything (as well as the fuel pump relay just dangling ), it ran on top of along the cam cover. I think its the a/c magnetic clutch connector according to the bgb. I think its been left unplugged since i got the car, what..
4
2012/12/01 12:25:33
Tree

Water dilemma (ha, get it?)

Hey guys I'm in another dilemma which means...thread time Okay so some of you might know of my "water plumbing issue". Basically my bypass system isn't working properly causing water pump to overwork itself, leading to cavitation and overheating yada yada. Bottom line is I need a Gen 3+ water outlet..
5
2012/11/26 22:25:48
purple5ive

Coolant boiling on Shutdown - Yes theres a way to avoid it

Many Turbo owners here have or has at some time experienced the coolant boiling sound when the car has been turned off... many say its a normal occurance while others are of the opinion thats theres air in the system, it got me thinking on the weekend and i decided to do a small test that anyone can..
12
2012/10/05 09:30:53
Shanns

AC PROBLEMS

Hey guys, I have a 1994 GT N/A. My thermo fan runs full speed constantly, AC not working. Does anyone have AC amp circuit test for this model as 93 BGB has a different wiring loom. Thanks...
4
2012/10/03 19:12:03
Tree

eGay radiator no bleed valve

I've got an eBay radiator and it doesn't have a proper air bleed valve to fit a clear plastic tubing. There's an opening for bleeding air but it's just a simple screw type plug like the drain cock, so bleeding air is a bit crude but doable, certainly not pleasurable Is there an air bleed valve attac..
5
2012/08/30 01:14:37
beagle_senior

Not a Bad Idea

I wish this was available back when I purchased my w/a intercooler... And finally something like this has been made.. http://www.emspowered.com/storefront/index.php?main_page=product_info&cPath=61_62_64_70&products_id=755 http://www.emspowered.com/storefront/images/482140_10151161055776223_1..
3
2012/08/09 21:44:21
Jamie16

engine bay fan problems

I have just recently bought this car it is a non turbo sw20 95 model. There is a red warning light on the dash board I believe it is for the fan in the engine bay. The fan never turns on, is this fan just for turbo models if not what exactly does the fan do. Also when is the fan supose to come on. T..
12
2012/08/06 10:18:21
Firthy

Rust in cooling system - non MR2

Morning folks, I finally drained the radiator on my daily (1993 corolla) and it's full of nice rust coloured water and I'm hoping for some knowledge from here as the internet says many different things. What are the recommended steps to flush and fix (or as best as I can)? Remove thermostat, connect..
5
2012/06/21 18:55:57
just_ace

gen2-gen3 elec conv AC issues?

my st185 (norm gen2 3sgte) is fitted with a gen3 engine and ecu setup using a berk patch loom. the AC no longer works, the signal isn't being sent to turn on the AC mag clutch. i think i've prtty much figured out why and the difference between the gen2/3 setups. just wanted to know and confim if oth..
3
2012/06/15 14:35:59

<< ..10 11 12 .. - Powered by APG vNext Trial

© 2026 APG vNext Trial Version 5.5

Use My Existing Forum Account

Username: Password:

Use My Social Media Account