2011/06/09 14:33:50
speedracer
i have a code 14 issue at the moment, i know its an ignition problem has anyone had this problem and what was there cause?
 
can i also ask how many boards are in a gen 3 ecu? it was sent away to be tested
2011/06/09 14:48:11
robk
The problem is probably one of the following:
- The igniter is faulty, OR
- The ignition output driver in the ECU is damaged, OR
- The IGT wire from the ECU to the igniter is broken, OR
- The IGF wire from the igniter back to the ECU is broken
2011/06/09 14:49:23
robk
What was the original problem that prompted you to check the error codes?
Were you still getting spark?
2011/06/09 15:13:08
speedracer
its hesitating, sort of cutting out very briefly (milli secounds)
2011/06/09 15:20:35
robk
OK, well what I said above still stands.
I suppose it could also be a worn component in the dizzy.
2011/06/09 15:59:58
speedracer
thanks again rob
i think my mech said dizzy and ignitor have been tested and there seems to be no problem with them so it may be the ecu. hoping its not, there a pain to try and find
© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Use My Social Media Account