Hoonsy
I notice in the main thread post you've swapped out the old with new Bilstein B6 struts + TRD springs. I know it's only been two days but can you comment on how you like them so far? 

I have not had a wheel alignment yet so can't yet say how the car handles in a spirited drive. Initial impressions are a firm ride, and sometimes "bouncy" which reflects the higher spring rate of these Eibach 8215.140 springs. These are definitely stiffer than the factory 93 springs. I have driven a car with BC BR coilovers and would say that these are about half way in between. The Bilsteins kept the car nicely under control when I entered a roundabout right after a level crossing, all within the speed limit of course ;)
 

Hoonsy
I have identical wheel specs (except I run 245/40 rear rather than 255/40) and have been told coilovers won't fit, but it looks like you managed to get these Bilsteins in fine! Any photos of the fitment?

The Bilsteins have exactly the same dimensions as the factory struts. This is in comparison to coilovers which have longer springs that would foul on the wider wheels. You have no hope of coilovers clearing and will need to go to a 7 inch wide wheel, or getting spacers which is going to look silly. Even with the struts you're only looking at a few mm clearance between the wheel and strut housing. There is much more clearance on the rears so you won't have any trouble with either struts or coilovers.
 
Here are some photos showing the ride height with the Eibach springs:
 

MaXim

Hoonsy
I notice in the main thread post you've swapped out the old with new Bilstein B6 struts + TRD springs. I know it's only been two days but can you comment on how you like them so far? 

I have not had a wheel alignment yet so can't yet say how the car handles in a spirited drive. Initial impressions are a firm ride, and sometimes "bouncy" which reflects the higher spring rate of these Eibach 8215.140 springs. These are definitely stiffer than the factory 93 springs. I have driven a car with BC BR coilovers and would say that these are about half way in between. The Bilsteins kept the car nicely under control when I entered a roundabout right after a level crossing, all within the speed limit of course ;)
 

Hoonsy
I have identical wheel specs (except I run 245/40 rear rather than 255/40) and have been told coilovers won't fit, but it looks like you managed to get these Bilsteins in fine! Any photos of the fitment?

The Bilsteins have exactly the same dimensions as the factory struts. This is in comparison to coilovers which have longer springs that would foul on the wider wheels. You have no hope of coilovers clearing and will need to go to a 7 inch wide wheel, or getting spacers which is going to look silly. Even with the struts you're only looking at a few mm clearance between the wheel and strut housing. There is much more clearance on the rears so you won't have any trouble with either struts or coilovers.

That's awesome, I may look at picking up a set. Who did you find best to order through?
I notice Bilstein don't have the MR2 listed on their site but there's a few retailers near me I could contact

I've got an 8" +35 front on teins with no spacer. They fit with about 3mm clearance so I'd say it all depends on the combination of parts you choose but definitely not outta the question.

My Eibachs took a couple of weeks for the ride height drop to be noticable.
Ride is definitely a lot firmer than the stock springs, but handling had a great improvement on the track...

Hoonsy
 
That's awesome, I may look at picking up a set. Who did you find best to order through?
I notice Bilstein don't have the MR2 listed on their site but there's a few retailers near me I could contact

They are definitely listed on the Bilstein online catalogue. Here are the part numbers you need to look out for:
 
Front left 22-247261
Front right 22-247278
Rear left 22-266439
Rear right 22-266446
 
I noticed the latest revision of these shocks have plastic caps where the gland nut normally goes. I suppose this is going to make them easier to rebuild without any cutting.
 
Got my shocks from MR2-BEN. I would advise you to make an enquiry before ordering as I was made to wait over a month for stock to arrive.