4x114.3 aw11

2012/11/09 13:00:48

LeBandit33

Just wondering if there is a way to convert the front and rear of an aw11 to 4x114.3 pcd as opposed to 4x100?

2012/11/09 13:48:46

MRVirgin

I don't know of any way to do this. Out of interest, why do you want to?

2012/11/09 14:55:05

LeBandit33

Because every style of rim I would like for the car are not available in 4x100! I want to rock some period correct ssr wheels! A lot more for sale in 4x114.3

2012/11/09 15:36:50

artymr2

Woul probably be cheaper and easier to have the wheels redrilled to 4x100.

Cheers

2012/11/11 09:03:15

Domma_aw11

Thats what i was going to say, but i have seen bolt on spacers that convert ur stud patern for what ur asking, just dnt kow how good or reliable that is, so i would say a re drill is the safest bet...

2012/11/11 11:05:54

LeBandit33

There is no way I'm going to be getting rare jap wheels redrilled! I like the idea of redrilling the hubs or spacers

2012/11/11 16:06:09

scz

Any spacers are going to upset yopur suspension setup.

2012/11/11 16:38:55

artymr2

Unless the offset of the wheels takes the spacer into account, then no difference in terms of suspension being effected.

Cheers

2012/11/12 13:12:05

dylmrt

What SSR's are you after? We come across a lot of 4x100 that I don't necessarily bring to Australia, but if you know what style/width/offset, its likely I can probably find a set for you?

2012/11/12 19:24:55

LeBandit33

I'm after a set of 15x8 ssr formula mesh! With an offset to sit flush with the guards! It's around the +25/+30 mark

4x114.3 aw11

Use My Existing Forum Account

Use My Social Media Account