I am having dramas fitting up my ebay snorkel has anyone else done one?

What car, what snorkel. Generally if your referring to a fibreglass copy snorkel or any other body kit part, they will need fitting; that often involved sanding, possibly cutting, possibly fibreglass work to get it to line up.

It is a sw20 turbo toms copy ebay snorkel

It should be straight forward. Remove old panel. Drill two holes (if not predrilled) for the 10mm bolts from the panel. Some people use a bunnings weather strip (like what you use for weather strips on doors and windows) between the side of the snorkel and the car (where it can't be seen - on the underside of the snorkel), stops it rubbing on the paintwork. Proper solution, there should be a tab on the passenger side bottom of the snorkel, and you drill through it (if it lines up to the screw in the side panel - above the radiator cap area). With fibreglass, check things twice before drilling or cutting.
I don't know how to post photos, that would make it easier.
Depending on how bad a copy you got and how fussy you are, I have done major cutting and fibreglassing, I should have bought a good one not a cheap one.
PM me and can maybe email photos, or I will work out how to upload photos at some stage.

Cheers TonyMR2 just finished fitting it what a pain in the you know what that was lol had to do a fair bit of cutting as well as a fair bit of swearing lol but it is all worth it in the end got it on and fits perfectly now yay for me WOW what a weekend new 3' dump pipe and full 3' dual exhaust system fitted plus painting and fitting of snorkel then washed sit back and watch very productive weekend on the sw20 I am beat and may I just recommend the 3' dump pipe and full 3' dual exhaust system I got new from Empire Performance looks and sounds the part all brand new with gaskets for $450 money well spent IMO :)