does anyone know the thickness/depth of the spal fans twosrus sell as I see no details or part numbers to reference.

If the fans are 810CFM Push then I believe they are the VA09-AP8/C-27S (30100365) which are also what is required for Totenkopfs fan shroud. There was previously going to be a group buy:
https://www.mr2australia.com/mr2play/tm.aspx?m=121480&mpage=6
 
Here are the measurements:
https://webstore.spalusa.com/en-us/product/0690/products/fans/11-fans/30100365/va09-ap8-c-27s-11-s-12v.aspx
I've been after some of these for years but the postage cost from US has always been crazy.

Yeah I bought one of those shrouds in the last group buy and sometime after I picked up some fans which look identical to the Spal's are branded "GT Peformance".  Never tried fitting them as I thought they were too thick but they come it at around 58mm vs the spal at 51mm.

Is it still too late to get in on this, I could maybe work something out with Tiff to ship over to WA

Not too late Tom, I remember early on you were thinking about getting some stuff, and that would be a good idea re WA postage.

Let me know what you're after.

I'll be posting up what everyone wants soon to get confirmations.

Let me jump on Twosrusband have a look but it will mostly be small stuff

I want to add:
Shin Etsu Silicone Grease x 1
to my order please,  pretty sure my knockoff spal fans will fit, just need to get my standoffs made for them.
 
When you looking finalising this as i'll be away for a considerable period of time come mid/late may.

Hey Tiff, so do you still want the Spal fans?

And probably once I hear back from 'TomsMR2' I'll list up the parts everyone has asked for.

Once I get confirmation ill ask for a deposit from everyone (because exchange rate, fees and postage once they get to Australia are very difficult to predict) then put the order in (probably splitting into two orders).

Once they get to Australia I'll sort postage so where people in Sydney can pick up or situations where someone like you and Tom having them posted to one location in WA, that will cut down costs. Once I know final postage etc I'll know the final balance then can send them out.

This turned into a much bigger task then I realised...

Actually for the price and to avoid disappointment later yeah i'll go for the 2 x 11" Spal pushers.

EVERYONE WANTING PARTS:
 
Please study the following list and answer questions where I have put a question mark and CONFIRM the parts are exactly what you're after:
 
Phiz – 2164:
3SGE/GTE Distributor Seal Repair Kit [12311984]
MKII MR2 Clutch Slave Cylinder [SC690]
Extended Clutch Pushrod [Slave Pin]
 
 
SW20TT – 2148:
MK2 MR2 Prothane Urethane Bushings - Total Kit [18-2012] – 18mm sway bar bushings
 
 
Shaz – Newcastle:
63628-17022   MKII MR2 T TOP WEATHERSTRIP (BODY-SIDE) – LH
63627-17022   MKII MR2 T TOP WEATHERSTRIP (BODY-SIDE) – RH
 
 
 
DamMR2T – postcode??
MK2 MR2 Prothane Urethane Bushings - Total Kit [18-2012] - What size sway bars??     
 
 
 
sambo - postcode??
2x 11" SPAL fans [SPAL multi] – Push or pull type??
 
 
 
 
tiff_lee – 6167
MKII MR2 OEM Key Blank - Plastic Head MKII MR2 OEM Key Blank - Plastic Head x1
MKII MR2 T-Top Sunshade Replacement Knob x4 - black
Eccentric T-Top Guide Eccentric T-Top Guide x2
MKII MR2 T Top Weatherstrip (body side) - LH x1
MKII MR2 T Top Weatherstrip (body side) - RH x1
MKII MR2 T Top Weatherstrip (T Top) - LH x1
MKII MR2 T Top Weatherstrip (T Top) - RH x1
Shin Etsu Silicone Grease x 1
2x 11" SPAL fans [SPAL multi] – both pusher type    
 
 
 
 
TomsMR2 – WA 
What parts????
 
 
 
Total : 21 items
 
 
-To work out rough cost convert cost from USD to AUD.
-Add postage of about $55 AUD
-Figure out postage within Australia from Sydney to your location (obviously if you're picking up nil postage or posting to one location in another state split the cost)  
-Foreign fee split between the 8 of us