• SHOWROOM
  • Knightrous' House of AW11 (and SW20, and ZZW30) (p.55)
2014/11/11 09:38:57
robk
Knightrous
robk
I just re-read this whole thread from the start. I needed to refresh my memory on the progress of your TrackDub and SlushDub.

You sir are insane hahaha :D

Well I did skim over some parts, but it still took a while lol.
 
Do you reckon you could bring the slush dub to the Sydney MR2 meet tomorrow night?
http://www.mr2australia.com/mr2play/tm.aspx?m=80729
 
 
2014/11/11 20:34:18
5SGTE
Ok Aaron I might have missed something.  I knew you were working (of some sort) in Syd but are you moving there full time?  I though you only just bought a house up here...
 
PM me if you like.
2014/11/12 08:24:08
Knightrous
robk
Do you reckon you could bring the slush dub to the Sydney MR2 meet tomorrow night?
http://www.mr2australia.com/mr2play/tm.aspx?m=80729

It's unregistered and has a blown head gasket currently, so it won't make a meet of any form (unless it's in my driveway :P) for a while. Looking to debut it at MTC2015.

5SGTE
Ok Aaron I might have missed something.  I knew you were working (of some sort) in Syd but are you moving there full time?  I though you only just bought a house up here...

Moved down to Sydney at the end of September for my new job, currently waiting to clear the shed of cars and workshop equipment so we can rent the house out.
2014/11/15 17:18:42
tralfaz
Yes, it is true on his own admission, Knightrous has gone insane and moved secretly to New South Wales.
 
His "Cane Toads" fan badge has been revoked, the ADub's have been impounded as prohibited exports (not allowed across the border) and a huge farewell party was held for him in Kingaroy, unfortunately after he had left.
 
The roads between Brisbane and Kingaroy will now never be the same, but we hear that many roadside residents are secretly joyful at being able to permanently remove their ear plugs now that the late night passing red flash sounding like a Boeing 747 engine on steroids will be no more.
 
As was said at the Kingaroy party, we'll never forget good old what's-his-name. Lost forever to the jungle of roads that is Sydney, the House of AW11 has left the building.
 
 
 
 
 
 
 
2014/11/15 19:53:06
Dudeman
tralfaz
 
His "Cane Toads" fan badge has been revoked...
 

 
Nope, that does not happen. No matter how long you live down here. No way will i ever support the dirty blue jersey.
 
2014/11/16 11:36:38
Knightrous
Out of the workshop and onto the drive way!
Some supercharged progress today.
 





 
Comparing technology from the 1950's and something from recent times.



 
Now I should have continued on the process of stripping the motor down to replace the head gasket, however I just couldn't help test fitting the twinscrew supercharger...




 
Doesn't fit particularly nice, so time to make some custom stuff :D
Started designing a new compact, equal length runner intake manifold to replace the dogs breakfast that is the factory SC manifold.
 

2014/11/16 21:26:56
5SGTE
You've got some scrubbing to do in that bay
2014/11/17 08:20:03
Knightrous
5SGTE
You've got some scrubbing to do in that bay

Clean engine bays are for people who don't drive their cars ;)
2014/11/17 08:50:28
Knightrous
Continuing from the engine tear down.
 
Just like working on a Fallcon or Commondoor, minus the sea sickness.

 
Off came the head.

 
Pistons look okay.

 
Bores.... Less so.


 
Headgasket was blown across all three dividers.

 
Head seems okay, needs a decent investigation though.

 
This wasn't good to find...

 
Or this...

 
So time for some new parts and a quick rebuild!
 
Plan now will be.
- Drop the motor, inspect the bottom end - Replace bearings if necessary.
- Hone the block and fit new rings to pistons - Maybe upgrade to some 8.9 small port pistons while they are cheap.
- Replace the camshafts and damaged buckets - Maybe 'invest' in some Kelford cams.
- Check head for defects, replace with another if necessary.
- Replace timing belt, water pump, thermostat and transmission filter.
- Replace head gasket, head studs and exhaust studs.
- Build a new custom intake manifold to make better use of engine bay space for installation of the twinscrew.
- Reassemble engine and get it back in the car.
- Fit the DIYPNP MegaSquirt ECU.
- Do skids all the way to MTC2015
2014/11/17 20:20:43
5SGTE
Knightrous
 
Clean engine bays are for people who don't drive their cars ;)




 
Guess that's why mines still clean!!
<< ..5556.. >> - Powered by APG vNext Trial
© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Use My Social Media Account