• SHOWROOM
  • Knightrous' House of AW11 (and SW20, and ZZW30) (p.54)
2014/08/20 23:48:41
Knightrous
The To Do list for tomorrow to get the SlushDub ready for Friday's track day
 

2014/08/26 16:45:29
spike10000
Knightrous
Before my change to the M62 supercharger, I was researching the possibility of a smaller pulley setup for the SC14. Today, a 110mm replacement clutch and pulley I had ordered has arrived.


 

 
This would work with a stock sized crank pulley, would allow the water pump to run at near stock speeds, would use the stock tensioner and still produce boost equivalent to running a 165mm crank pulley.
 
I was going to machine off the multi-rib pulley and fit a HTD8M tooth pulley for a gilmer drive setup to avoid any potential belt slip from having less belt area on the smaller pulley. I might still fit this up to my spare SC12 and give it a go before the M62 go onto the car.




Hate to bring up a relic mate, but what supercharger exactly is that clutch meant for?
2014/08/26 20:03:55
Knightrous
It's actually from an AC unit. I just need to modify the centre of it and machine up a hub to mount it to the supercharger.
2014/08/27 11:19:45
maj
You skipped the part where the Slushdub wanted to be more like its Autodub cousin and BHG'ed.
2014/09/17 13:48:58
Knightrous
maj
You skipped the part where the Slushdub wanted to be more like its Autodub cousin and BHG'ed.

I haven't skipped it, I just haven't had the time to get around to compiling an event report.
Been too busy traveling to Sydney for work and looking for a house to live in down there :P
 
But yes, in short, the suspected head gasket became a blown head gasket. Now I can fix it without worrying that the head gasket might be a problem :D.
 
While I was ordering parts to replace the headgasket, I also bought this thing....
 


2014/10/27 15:48:53
Knightrous
One step closer to fixing the SlushDub



 
Now just need to get the car into the same state as me and try to get it fixed!
Hoping to get her running for MTC2015 and give it a shake down with the twinscrew!
2014/11/10 21:59:27
Knightrous
Home and unloaded...
 


 
With her home, it's time to start the repairs, restoration and upgrades!
 

2014/11/10 23:07:18
robk
I just re-read this whole thread from the start. I needed to refresh my memory on the progress of your TrackDub and SlushDub.
Are you still intending to take the TrackDub to MTC 2015, with the SlushDub as a backup only?
2014/11/11 08:13:28
Knightrous
robk
I just re-read this whole thread from the start. I needed to refresh my memory on the progress of your TrackDub and SlushDub.

You sir are insane hahaha :D
 
robkAre you still intending to take the TrackDub to MTC 2015, with the SlushDub as a backup only?

It really depends if I get a chance to make a trip home to QLD before XMAS, and then still have enough time to finish the car off, which might be a big ask. I'll make my mind up as I get closer to the event.
2014/11/11 09:36:05
Eric
Dont You need to pick up a mint 1mz first :P
<< ..5354.. >> - Powered by APG vNext Trial
© 2025 APG vNext Trial Version 5.5

Use My Existing Forum Account

Use My Social Media Account