various engines available with various levels of rebuild. Please email us directly if you have a specific interest. Can sell most of them outright or exchange. None of them have ancillaries like starter, alternators or manifolds. Note, "short" means no head,

4AGZE. short motor , block honed & decked, good factory std pistons, crank ground, new rings bearings, seals, gaskets, oil pump , timing belt& roller. can fit a head if required, but I dont have any GZE cams.

4AG . long motor, 86KW version (early AW11). long motor, block honed & decked, crank ground, new rings, bearings, seals, gaskets, oil pump , timing belt& roller, head overhauled with valves & seats cut as required

4AG . long motor, 92KW version (later AW11). long motor, block honed & decked, crank ground, new rings, bearings, seals, gaskets, oil pump, timing belt& roller. head overhauled with valves & seats cut as required

4AG . long motor, 92KW version (later AW11). long motor, block honed & decked, crank ground, new rings, bearings, seals, gaskets, oil pump, timing belt& roller. head overhauled with valves & seats cut as required
4AG 20 valve long motor, modiferd cams, new rings, bearings, saals etc valves cut, reshimmed

4AG . long motor, 92KW version (later AW11). long motor, block bored & decked, crank ground, new pistons, rings, bearings, seals, gaskets, oil pump, timing belt& roller, head fully overhauled with valves & seats cut as required, new exhaust valve guides.

4AG big port cylinder head. Original Group A high compression head. valves & seats all recut, new seals

7AG20 valve. currently under construction. full race spec, nitrided crank, special roids, flowed black-top head and quad throttles etc etc


3SGE Gen 2,long motor SW20. block bored & decked, crank ground, new pistons, rings, bearings, seals, gaskets, timing belt& rollers, water pump. head fully overhauled with new guides, valves & seats cut as required.

3SGTE Gen 2,long motor SW20. block bored & decked, crank ground, new pistons, rings, bearings, oil pump, seals,timing belt& rollers, water pump, gaskets. head fully overhauled with new guides, valves & seats cut as required.

3SGTE Gen 3, short motor SW20. block bored & decked, crank ground, new pistons, rings, bearings, oil pump, seals, timing belt& rollers, water pump, gaskets.

sorry im a bit of a newb and am not so sure what is meant by short and long block.

short means no cylinder head. see note above

How much is a 3sgte long motor worth?

PM sent

ok how many of these do you hav left and what prices are the long blocks if you have any left.

thanks for enquiry, but you have not told me what engines you are interested in. I had 1 of each of those listed, except 3SGTE where I had 2. some look like they have sold.

How much for the 4agze?

Also i might ask, what's a rough price for installation (assuming it all goes to plan - remove old engine, swap any bits that need swapping, put new engine in?

Cheers!

assuming its a 4AGZE AW11, then to swap over gearbox clutch etc, change the "short" motor, and fix-up/machine current head will take around 20 hours work plus a handful of parts. we always recommend the radiator is removed and cleaned, and any hoses showing signs of decay (most usually), are also changed. considering all that, allow $2000