Hi everyone,
The part out of my 1988 AW11 mr2 g limited targa top has begun. I will try and update this as often as possible. The car will be stripped as far as possible, i really want my loss to be everyone elses gain. If you need any part, please contact me. I am part way through at this stage. I will list prices where possible, but for most things i will be negotiable. If i dont list a price, please feel free to PM me with an offer. Any listed prices do not include shipping. Most things will be shipped express post in satchels, so shipping prices start at $11.35. Larger items will be dealt with case by case. Pickup West Melbourne, and can organise to meet you in a 30k radius from the CBD if picking up a few things, or bulky items.
 

Bodyform UK intake scoop (passengers side) Good condition, needs repainting SOLD

AW11 SC engine lid (fibreglass) Paint is poor condition, in good condition, has all rubbers, and emissions stickers SOLD

Bootlid with non brake light spoiler (may seperate) Boot paint has scratches, and some paint rubbed through on back edge of spoiler SOLD
 

AW11 kouki tail lights. Great condition. complete, unbroken. sealing rubbers a bit perished. comes with all mounting nuts etc SOLD
 

Cusco Master cylinder brace, suits S/C only from my understanding SOLD

4x advan A050 medium compound semis, come with free speedy alloys and whee nuts to suit. 43wk 2011 production. did 1 track day when new, then wrapped and stored off ground till christmas last year. done 1200km of street duties since. 90% tread. At this stage wont seperate wheels and tyres, SOLD

1nz coil set. will supply with a modified stock n/a centre trim garnish. Has a power wire long enough to make it to stock coil power. Loom long enough to make it to stock ecu location. Pins suit most haltech, motec, link and wolf ecus. multiple grounds in loom. Raychem DR25 heatshrink used, and high quality connectors. $200

 
 
Cooling fan module, and GZE external alternator reg. Both in good working order $20 each

Custom made catback. 2.5 inch. Has 100 cell cat, resonator and varex muffler. No longer have varex control module, but muffler in open position. Built many years ago. rear valance needs trimming to clear 4 in tip. flange in right spot for stock exhaust. As some small cracks, but can repair. SCRAPPED
 
MORE ITEMS IN COMMENTS BELOW!!!!!

I'm interested in C-pillar trims, rear visor and Bride seat rail.
PM prices/photos.

Sorry to hear about the car man. Wouldn't take much to write these off.

sorry to hear it got smashed,hope nobody got hurt,
small part but any of the 4 plastic covers that go over the ends on the targa roof??
i can get pics of my broken ones tomorrow.
thanks in advance
 

Interior light Lens in good condition and available?

Sent from my SM-J320ZN using Tapatalk

Hey guys, i will get some photos of requested pieces for you all today, and try to have pms to you this afternoon.

Everyone contacted as best as possible for now.

Mrskylighter
Sorry to hear about the car man. Wouldn't take much to write these off.

Yes it is sad. 
 
And also why i get pissed at tight ass owners/buyers who keep slamming the price down when buying these cars.  Our red book/market value is kept low because of this and a low $$ smash repair will just be written off by insurance companies.   Grrrr
 
 
Glad you weren't hurt man. 
 
 

let me know about gearbox, mounts  and axles. thanks

BC MH coilovers. Maybe done 30,000km. no leaks, no knocks. 6k front 8k rear springs. Revised version, come with front swaybar links (shorter, to give front swaybar clearance) SOLD

Goodridge braided brake lines, great condition, no damage to plastic sheath. will supply with all hardware DONATED
 

AW11 mk1b rear brakes. Solid 263mm rear rotors, older RDA slotted. comes with calipers and all bolts/hardware. Have RDA redstuff pads with 25% pad left. good upgrade for 84-86 cars DONATED

Megan Racing SW20 rose jointed rear trailing arms. Yes these fit AW11. Supplied with superpro bushes to suit lower control arms. Used, but no play in heim joint. Were cleaned every 5,000km SOLD

Twos r us rear toe arms. V1 design. Not a fan of these, feel the inner joint is insufficient for track use. Were fitted after bending 2 sets of the V2 design (V1 are worse) only recommended if your stock ones are bent, or some wheel alignment monkey destroyed yours. tie rods and joints in good condition SOLD

Stock rear lower control arms, and good condition ball joints. Stock inner bushings in servicable condition. Good to buy as a spare, or one you can paint and prep while still keeping your car mobile SCRAPPED

Rear uprights. Hubs are the originals. Were machined and sleeved to make servicable. bearings were replaced with genuine 9-10 years ago. still spin freely with no play, but no garantees. Backing plates undamaged. Supplied with strut bolts. SCRAPPED

Rear suspension pickup point subframes. Good to have a spare set if you planning on trying to alter pickup points, or if yours are bent. Can supply with mounting bolts. SCRAPPED
 
 Will be stripping the car further tomorrow. Parts still to be listed (just to get your brain ticking, basically whole car is available, just interior is in poor condition:
- Steering rack (good condition rack ends and tie rod ends)
- E51 non lsd gearbox, driveshafts, brackets mounts, clutch, flywheel and starter
Any other bits or pieces you may need. happy to help.