Hello everyone, 

I have a 1991 Sw20 Mr2 and the Shocks are gone on the rear. I need new ones to pass regency, and get my car back on the road!

Unfortunately as you all probably new, there aren't all that many stock struts floating around, and as I'm a student, I really can't afford to buy new ones, or coilovers.

What other toyota models (Or any car for that matter) use similar struts that will bolt onto my Sw20 to pass regency?

Thanks c: 

just get new inserts in them. from repco.

I really don't know anything about Shocks, if you could explain I would be very greatful c:

im not good at explaining.. 
repco make things that make your shocks new again.
they are called inserts.
a suspension shop can do this for you.. cost you maybe 500 bucks? i dunno.
 
:)
 

Ah I see fair enough xD I can get a good condition pair of shocks from a wreckers for $350, it just seems a little steep, that's all.

I see you're from Adelaide. Ride height they got you for?
Having been through the dreaded Regency in the past, I'd say your rear springs have sagged, taking you below the MIN eye brow height (dist centre of wheel to top of wheel arch) of 340 mm. 
I had to get my springs taken out then sent them to Industrials on Port Rd to get them 're-set' (lengthened). I can't remember if Kings or Lovells make std height replacements. Maybe try Pedders? 
Also getting 'stock struts' from wreckers (if you can find any) has its risks, because most are old and sagged also i.e. too low!
I don't think there are any other Toyota struts that'll fit.
Good luck
 
 
 

So really my only option is to get new ones xD?

Well you could try the ones from wreckers, but I couldn't guarantee that they are high enough.
is it the complete strut assembly?
 

I believe it is c:

worth a shot - ask them if they take returns lol