Totenkopf's cleaning out the shed. (Part 1)

• Old fuel tank, fuel is putrid, think the insides not the best if the condition of the pump I pulled out would be anything to go by
• Old exhaust off my car, couple of magnaflow mufflers, pretty ****ty quality custom job.  Mufflers are quite good units though, dunno if it'll marry up to the original downpipe
• 3SGTE block (gen 2) all main caps here.  Should have all 4 squirters too (maybe minus one of the banjo bolts?  Will see if I can find it)
• Dash cluster, good for parts only.  Someone stole some parts from it, then I went and stole some more to make the surround for my AIM dash
• gen 2 upper and lower timing belt covers
• engine bay heat shields, were ceramic coated, scratched up now though (need to make sure these are mine)
• alternator, good working condition cant remember exact specs 90 or 100A unit from power steer car with oval plug (~92+)
• random suspension parts
• couple of alternator brackets
• 2 or three starter motors laying around
• couple of clutch slave cylinders + bracket around
• headlights, unsealed housings, useful for parts only, one of the pop up assemblies if busted
• air con compressors, unknown condition, think 1 is off an MR2, two others probably off of 5SFE camrys..  Can get PN's.  I know the camry ones were gassed when I removed the engines
• fuel filler tube
• stearing rack (unknown condition, out of a pranged car so should be given a good going over before use)
• OEM tube inlet tube, no cracks
• quarter windows
• ST185 ECU
• boot rubber seal
• engine side inspection covers.  Two complete, two I've cut the guts out of as I was thinking of fitting mesh to them for vented design
• Bearing support bracket for drive shaft, the bolt is pretty much new so still has the rubber knob on it
• cam cover, AN fitting welded on, baffles will need sand blasting, crusty
• AC amplifier (that yellow electrical boxy thing) 
• engine lid prop, complete
• 4 mild steel 1/2" flanges, suit gen 2, 7 and 9 bolt designs
• passenger side moulding that sits over the side vent, primed, ready for paint
• Plastics from around stereo
• plastics from around gearboot (VGC, no cracks!)
• quarter window vent thingies (black triangular things in rear quarter window)

-Totenkopf-