Possible GB : 100% CARBON FIBRE OEM AERO VISOR (Hardtop & Sunroof) PicsssSSS ! ! !
Here we go guys, I am about to get back into the game on full gear. Hoping to find a MR2 soon and I will be starting to do some unique pieces for our beloved MR2 SW20.
I have a very very reputable shop that does all the bodykit/trim pieces for me. The shop handle mostly very high end euro cars and custom parts for race car.
This piece comes to mind when I saw the below picture on one of his demo car. Long story short, I went ahead and got myself an OEM JDM visor
---------------------------------------------------------------------------------------------
Proposed Product: 100% Carbon Fibre OEM Rain Visor for your Hardtop / Sunroof. Details: Due to the curve/flexiblility needed for this unique visor, the material and mold will be much harder to make. In order to do this perfectly, 4 different molds will need to be make (1 upper side and 1 under side, for 2 sides).
I will opt for the smooth finish without using mounting hardware other than heavy duty 3m tape (OEM uses about 4 little metal taps that goes into the rubber molding, not a good idea as it will easier damage it).
The complete piece will be build in carbon fibre, therefore, both upper side and under side will be nice shiny carbon finish (just like the below pictures).
Price Details: This piece will be expensive and I will only do this if I can get enough interest / deposit on it. Given a used set of OEM visor will run you anywhere from $250-$300 nowaday, these will be a good option
5 sets = $335 AUD Posted
10 sets = $310 AUD Posted
15 sets = $290 AUD Posted
20+ sets = $280 AUD Posted
Ordering: I will need $150 AUD deposit to confirm your spot. Pls state your user name in the paypal.
** I will start to collect deposit once I get the first FIVE interested buyer on the list **
Paypal: [email]chriskwwong@netvigator.com[/email] Interested Buyer:
1 - HKSMR2TURBO (MR2OC.com)
2 - Tj saxon (MR2OC.com)
3 - JRMR2 (MR2OC.com)
4 - JPAudio (MR2Australia.com)
5 -
6 -
7 -
8 -
9 -
10 -
Leadtime: Once I get enough interest/deposit, the production will start, this will take about 3-4 weeks for the initial tester, then I will fine tune it in case of any issues (fitment/finish/etc...). Expect it to be all done in 4-8 weeks.
Sample Pictures:
Close up on the weaves:
Showing the curves:
Underside:
Original Visor:
Wiki Picture of a JDM MR2 with the Visor:
post edited by DB8 - Friday, August 31, 2012 6:13 AM